Geely EC718, EC718RV, EC715, EC715RV. Manual part — 407
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 407
FE11-0277b
4.
Remove the tail lamp retaining bolts and pull out the tail
lamp.
FE11-0278c
5.
Remove the left tail lamp and remove the bulbs.
Body Electric
Lighting System
11-141
FE11-0279c
6.
Remove the left tail lamp and remove the bulbs.
Installation Procedure:
FE11-0280c
1.
Insert the bulbs into the tail lamp assembly.
Note
Avoid touching the bulb or letting the bulb to come
into contact with any moist. When the lamp is turned
on, the grease or moisture on the bulb may cause
the bulb explode. If the bulb contacts with grease or
moisture, clean the bulb with alcohol or an
appropriate cleaning agent and dry the bulb.
11-142
Lighting System
Body Electric
FE11-0281b
2.
Install the tail lamp assembly.
Torque: 3 Nm (Metric) 2.2 lb-ft (US English)
FE11-0282b
3.
Connect the tail lamp assembly wiring harness connector.
4.
Install the hatchback trim panel.
5.
Connect the battery negative cable.
Body Electric
Lighting System
11-143
FE11-0283c
6.
To replace the tail lamp bulb, open the tail lamp cover.
11.4.8.14 License Plate Lamp Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE11-0284b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the rear compartment lid trim panel. Refer to
Rear Compartment Lid Inner Trim Panel
FE11-0285b
3.
Disconnect the License Plate Lamp wiring harness to
connect devices.
4.
Remove the rear compartment lid applique. Refer to
Rear Compartment Lid Applique Replacement
.
11-144
Lighting System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст