Geely EC718, EC718RV, EC715, EC715RV. Manual part — 405
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 405
FE11-0261b
5.
Remove the Headlamp bulb cover.
6.
Disconnect the headlamp bulb connector.
7.
Remove the Headlamp bulb.
Installation Procedure:
Warning!
Refer to "Halogen Bulb Warning" in "Warnings and
Notices".
FE11-0262b
1.
Install headlamp bulb.
Note
Avoid touching the bulb or letting the bulb to come
into contact with any moist. When the lamp is turned
on, the grease or moisture on the bulb may cause
the bulb explode. If the bulb contacts with grease or
moisture, clean the bulb with alcohol or an
appropriate cleaning agent and dry the bulb.
2.
Connect the Headlamp bulb connector.
3.
Install the headlamp bulb cover.
Body Electric
Lighting System
11-133
FE11-0263b
4.
Install the headlamp and tighten the retaining bolts.
Torque: 8.8 Nm (Metric) 6.5 lb-ft (US English)
FE11-0264b
5.
Connect the headlamp wiring harness connector.
11-134
Lighting System
Body Electric
FE11-0265b
6.
Connect the connector.
7.
Install the front bumper.
8.
Connect the battery negative cable.
Note
After installing the headlamp, adjust the light beam.
The front park lamps, front turn signal lamps
replacements are the same as the headlamp.
11.4.8.12 Tail Lamp Replacement (Sedan)
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE11-0266b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the rear compartment side trim. Refer to
Rear Compartment Trim Panel Replacement
Body Electric
Lighting System
11-135
3.
Disconnect the tail lamp harness connector.
4.
Remove the tail lamp retaining bolts.
11-136
Lighting System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст