Geely EC718, EC718RV, EC715, EC715RV. Manual part — 520

Installation Procedure:

FE12-0202b

1.

Install the instrument panel carrier.

2.

Install and tighten the instrument panel carrier retaining
bolts.

Torque: 21 Nm (Metric) 15.5 lb-ft (US English)

3.

Install the instrument panel wiring harness.

4.

Install the steering wheel column.

5.

Install the instrument panel.

6.

Install the glove box.

7.

Install the instrument panel outer trim covers.

8.

Install the ambient light sensor.

9.

Install the radio control assembly.

10. Install the instrument panel center air outlet deflector.

11. Install the multi-function clock.

12. Install the instrument cluster trim panel.

13. Install the headlamp switch covers.

14. Install the steering wheel.

15. Install the center console cup holder.

Body, Sheet Metal and Painting

Instrument Panel, Gages and Console

12-69

12.9 Interior Trim

12.9.1 Removal and Installation
12.9.1.1 Headliner Replacement

Removal Procedure:

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

1

1

1

2

2

FE12-0021b

1.

Disconnect the battery negative cable. Refer to

2.11.8.1

Battery Disconnection

.

2.

Remove the front and rear door sill trim plate. Refer to

12.9.1.2

Left and Right Door Sill Nameplate

Replacement

.

3.

Remove the windshield garnish molding. Refer to

12.9.1.3

Windshield Garnish Molding Replacement

.

Remove the center pillar upper trim panel. Refer to

12.9.1.3

Windshield Garnish Molding Replacement

.

Remove the quarter upper trim panel. Refer to

12.9.1.3

Windshield Garnish Molding Replacement

.

4.

Remove the dome lamp. Refer to

11.4.8.4

Dome Lamp

and Reading Lamp Replacement

.

5.

Remove the door seal strips. Refer to

12.9.1.16

Vehicle

Inner Side Seal Replacement

.

6.

Remove the assist handles and sunshades.

FE12-0022b

7.

Prise open the right front assist handle retaining screw
covers.

12-70

Interior Trim

Body, Sheet Metal and Painting

FE12-0023b

8.

Remove the right front assist handle retaining screws. The
removal for the left rear and right rear assist handles is the
same.

FE12-0024b

9.

Prise open the sunshade retaining screw covers.

FE12-0025b

10. Remove the sunshade retaining screws, rotate the

sunshade clockwise 90 ° and then remove the sunshade.

Body, Sheet Metal and Painting

Interior Trim

12-71

FE12-0026b

11. Disconnect the left sunshade harness connector.

FE12-0027b

12. Remove the left sunshade retaining bolt and remove the

sunshade hook. The removal of the right sunshade is the
same.

FE12-0028b

13. Remove the headliner rear retaining clips.

12-72

Interior Trim

Body, Sheet Metal and Painting