Geely EC718, EC718RV, EC715, EC715RV. Manual part — 519

FE12-0015b

15. Remove the instrument panel left side retaining bolts.

FE12-0016b

16. Remove the instrument panel center retaining bolts.

FE12-0017b

17. Remove the instrument panel right side retaining bolts.

18. Disconnect the passenger airbag harness connector from

the back of the instrument panel. Remove the passenger
airbag. Refer to

9.2.7.4

Passenger Front Airbag

Replacement

.

19. Remove the instrument panel.

20. Remove the instrument panel outer air outlet upper duct.

Refer to

8.2.8.12

Air-conditioning Ventilation Pipe

Replacement

.

Body, Sheet Metal and Painting

Instrument Panel, Gages and Console

12-65

Installation Procedure:

FE12-0018b

1.

Install the instrument panel outer air outlet upper duct and
the passenger airbag to the instrument panel.

2.

Install the instrument panel.

3.

Connect the passenger airbag harness connector.

4.

Install the instrument panel right, center and left retaining
bolts.

Torque: 7 Nm (Metric) 5.1 lb-ft (US English)

5.

Connect the instrument panel lower right trim harness
connector on the back, install and tighten the instrument
panel lower right trim retaining screws.

Torque: 4 Nm (Metric) 2.9 lb-ft (US English)
Torque: 6 Nm (Metric) 4.4 lb-ft (US English)

6.

Install the hood release handle. Install and tighten the
instrument panel lower left trim retaining screws. Connect
the headlamp height adjust switch harness connector and
install the headlamp height adjust switch cover.

Torque: 4 Nm (Metric) 2.9 lb-ft (US English)

7.

Install the instrument panel trim panels.

8.

Install the glove box.

9.

Install the instrument panel outer trim covers.

10. Install the ambient light sensor.

11. Install the radio control assembly.

12. Install the instrument panel center air outlet deflector.

13. Install the multi-function clock.

14. Install the instrument cluster trim panel.

15. Install the headlamp switch cover.

16. Install the steering wheel.

17. Install the center console cup holder.

12-66

Instrument Panel, Gages and Console

Body, Sheet Metal and Painting

12.8.3.2 Glove Box Replacement

Removal Procedure:

FE12-0019b

1.

Remove the glove box clips on both sides.

2.

Remove the glove box.

Installation Procedure:

FE12-0020b

1.

Install the glove box.

2.

Install the glove box clips on both sides.

12.8.3.3

Instrument

Panel

Carrier

Replacement

Removal Procedure:

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

Note

Please use special tools to remove interior panels,
otherwise panels will be easily scratched.

Body, Sheet Metal and Painting

Instrument Panel, Gages and Console

12-67

FE12-0201b

1.

Disconnect the negative battery cable. Refer to

2.11.8.1

Battery Disconnection

.

2.

Remove the center console cup holder. Refer to

3.3.8.9

Shift Lever Replacement

.

3.

Remove the steering wheel. Refer to

7.3.6.3

Steering

Wheel Replacement

.

4.

Remove the headlamp switch covers. Refer to

11.4.8.1

Headlamp Switch Replacement

.

5.

Remove the instrument cluster trim panel. Refer to

11.7.7.1

Instrument Cluster Replacement

.

6.

Remove

the

multi-function

clock.

Refer

to

11.15.8.1

Instrument Cluster Replacement

.

7.

Remove the instrument panel center air outlet deflector.
Refer to

8.2.8.11

Instrument Panel Air Duct

Replacement

.

8.

Remove the radio control assembly. Refer to

11.2.7.5

Radio Control Replacement

.

9.

Remove the ambient light sensor. Refer to

11.4.8.20

Ambient and Sun Light Sensor Replacement

.

10. Remove the instrument panel outer trim covers. Refer to

12.9.1.3

Windshield Garnish Molding Replacement

.

11. Remove the glove box. Refer to

12.8.3.2

Glove Box

Replacement

.

12. Remove

the

instrument

panel.

Refer

to

12.8.3.1

Instrument Panel Replacement

.

13. Remove the steering wheel column. Refer to

7.3.6.4

Mechanical

Steering

Column

Assembly

Replacement

.

14. Remove the instrument panel wiring harness retaining

bolts and clips.

15. Remove the instrument panel carrier retaining bolts.

16. Remove the instrument panel carrier.

12-68

Instrument Panel, Gages and Console

Body, Sheet Metal and Painting