Geely EC718, EC718RV, EC715, EC715RV. Manual part — 105

FE01-0022b

3.

Release the Drive Belt Tensioner device to the normal
position.

Note

Before releasing the tensioner device, confirm the
drive belt aligned drive pulley groove, otherwise the
drive belt may be damaged.

4.

Connect the battery negative cable.

2.6.8.4 Drive Belt Tensioner Replacement

Removal Procedure:

FE02-0086b

1.

Disconnect the battery negative cable. Refer to

2.11.8.1

Battery Disconnection

.

2.

Remove the hood. Refer to

2.6.8.1

Plastic Engine Shield

Replacement

.

3.

Remove the drive belt. Refer to

2.6.8.3

Drive Belt

Replacement

.

FE02-0087b

4.

Remove the drive belt tensioner retaining nut.

Engine

Engine Mechanical System JL4G18-D

2-335

FE02-0088b

5.

Remove the drive belt tensioner pulley bracket bolt.

Installation Procedure:

FE02-0089b

1.

Install drive belt tensioner bracket bolts.

Torque: 69 Nm (Metric) 51.1 lb-ft (US English)

FE02-0090b

2.

Install drive belt tensioner bracket retaining nut.

Torque: 29 Nm (Metric) 21.5 lb-ft (US English)

3.

Install the drive belt.

4.

Install the engine hood.

5.

Connect the battery negative cable.

2-336

Engine Mechanical System JL4G18-D

Engine

2.6.8.5 Throttle Body Assembly Replacement

Removal Procedure:

Warning!

Refer to "Battery Disconnection Warning" in "Warnings
and Notices".

FE02-0091b

1.

Disconnect the battery negative cable. Refer to

2.11.8.1

Battery Disconnection

.

2.

Remove the throttle pull cable.

FE02-0092b

3.

Remove the throttle body from the intake manifold.

FE02-0093b

4.

Disconnect throttle position sensor wiring harness
connector.

Engine

Engine Mechanical System JL4G18-D

2-337

FE02-0095b

5.

Disconnect idle speed control valve wiring harness
connector.

FE02-0096b

6.

Remove the crankcase ventilation hose.

FE02-0097b

7.

Remove throttle body preheated water inlet pipe.

2-338

Engine Mechanical System JL4G18-D

Engine