Geely EC718, EC718RV, EC715, EC715RV. Manual part — 448
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 448
11.8.5 Disassemble View
11.8.5.1 Disassemble View
Sunroof Disassemble View
1
2
3
4
FE11-0602b
Legend
1. Roof Stiffener
2. Sunroof Frame
3. Sunroof Visor
4. Sunroof Aqueduct
Body Electric
Sunroof
11-305
11.8.6 Schematic
11.8.6.1 Schematic
Battery Voltage
To Ground
Ignition Switch
Tilt
Slide
Accessory Power Supply
Alarm
(Vehicle Speed Signal)
Power Supply
Motor M+
Motor M-
A_Phase
B_Phase
FE11-0603b
11-306
Sunroof
Body Electric
11.8.7 Diagnostic Information and Procedures
11.8.7.1 Diagnosis Description
Refer to
get familiar with the contents of system functions and operation of a later start system
diagnostics, so that will help in the event of failure determine the correct troubleshooting steps, more importantly, so would also help
to determine whether the customer describe the situation of normal operation.
11.8.7.2 Visual Inspection
–
Check installed after market equipment that may affect system normal operations.
–
Check the easy to access system components to identify whether there is a significant damage or a potential malfunction.
–
Check whether the sunroof initialization is no longer valid.
11.8.7.3 Sunroof Initialization
When the initial position is lost, perform this procedure:
At the completely tilt position, press the tilt button for more than 5s, sunroof will perform the initialization.
11.8.7.4 Sunroof Inoperative
Schematic:
Sunroof Switch
Sunroof Module
FE11-5701b
Body Electric
Sunroof
11-307
Diagnostic Steps:
Step 1
Check the fuses, IF3, IF25, IF8.
IF14
IF2
IF1
IF5
IF7
IF3
IF16
IF27
IF25
IF26
IF28
IF30
IF24
IF20
IF19
IF23
IF18
IF21
IF13
IF12
IF15
IF9
IF10
IF8
F17
F22
M
FE11-5702b
(a)
Check whether the fuses, IF3, IF25 and IF8 are blown.
Fuse Rating: Respectively 30 A, 10 A, 10 A
No
Yes
Step 2
Check the fuses, IF3, IF25, IF8 circuits.
(a)
Check the fuses IF3, IF25 and IF8 for short circuits.
(b)
Repair the circuits. Confirm that there are no short circuits.
(c)
Replace with fuses with rated current.
Is the sunroof working correctly?
Yes
System normal
No
Step 3
Carry out the sunroof initialization.
(a)
Carry out the sunroof initialization. Refer to
Is the sunroof working properly?
Yes
System normal
No
Step 4
Check the sunroof switch harness connector RF06 ground circuit.
11-308
Sunroof
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст