Geely EC718, EC718RV, EC715, EC715RV. Manual part — 431
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 431
No
Step 2
Measure the wiper switch wiring harness connector terminal No.2 voltage.
1
10
2 3
12
4
13
5
14
6
15
7
16
8
17
9
18
Wiper Switch Harness Connector IP19
FE11-5512b
(a)
Turn on the ignition switch.
(b)
Turn on the washer switch.
(c)
Measure the wiper / washer switch terminal No.2 voltage with
a multimeter.
Standard Voltage: 11-14 V
Is the voltage specified value?
Yes
No
Step 3
Replace the wiper switch.
(a)
Replace the wiper switch. Refer to
Is the wiper switch working correctly?
Yes
System normal
No
Step 4
Check whether the washer fluid is sufficient.
(a)
Add washer fluid.
Yes
No
Step 5
Add windshield washer fluid.
(a)
Add windshield washer fluid.
Confirm that the windshield washer is working correctly.
No
Step 6
Check the windshield washer hose and nozzle.
(a)
Check the windshield washer hose and nozzle for blockage
or damage.
No
Body Electric
Wipers / Washers System
11-237
Yes
Step 7
Repair or replace the damaged windshield washer hose and nozzle.
(a)
Repair or replace the damaged windshield washer hose and
nozzle.
Is the windshield washer working correctly?
Yes
System normal
No
Step 8
Check the windshield washer motor power supply.
1
2
3
Washer Motor Harness Connector CA24
FE11-5513b
(a)
Turn on the ignition switch.
(b)
Turn on the windshield washer switch.
(c)
Measure the Windshield Washer Pump harness connector
pin 2 voltage with a multimeter.
Standard Voltage: 11-14 V
Is the voltage specified value?
Yes
No
Step 9
Check the circuit between the windshield washer motor and the windshield washer switch.
11-238
Wipers / Washers System
Body Electric
1 2
3
Washer Motor Harness Connector CA24
1
10
2 3
12
4
13
5
14
6
15
7
16
8
17
9
18
Wiper Switch Harness Connector IP19
FE11-5514b
(a)
Check and repair the open circuit between the windshield
washer motor and the windshield washer switch.
Is the windshield washer working correctly?
Yes
System normal
No
Step 10
Check the windshield washer motor ground circuit.
1 2
3
Washer Motor Harness Connector CA24
FE11-5515b
(a)
Test continuity between the windshield washer electrical
ground circuit (pin 1) and the body ground with a multimeter.
Resistance Standard Value: Less than 1 Ω
Is the resistance specified value?
Yes
No
Step 11
Repair the Windshield Washer motor ground circuit.
(a)
Repair the Windshield Washer motor ground circuit.
Confirm whether the Windshield washer ground circuit is normal.
Yes
System normal
Body Electric
Wipers / Washers System
11-239
No
Step 12
Replace the windshield washer motor.
(a)
Replace the windshield washer motor. Refer to
Washer Motor and Hose Replacement
.
Confirm the repair is completed.
Next
Step 13
System normal.
11.6.7.8 Rear Window Wipers Inoperative (Hatchback)
Schematic:
I/P Fuse Block
Wiper/Washer Switch
Rear Wiper Switch
Body Control Module (BCM)
To Front Wiper Switch
Rear Wiper Motor
To Fuse Block
FE11-5521c
11-240
Wipers / Washers System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст