Geely EC718, EC718RV, EC715, EC715RV. Manual part — 515
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 515
FE12-0183b
12. Jack and support the vehicle subframe.
13. Remove the subframe retaining bolts.
FE12-0184b
14. Remove the subframe together with the steering
assembly, the stabilizer bar, the front lower control arms,
the engine rear insulator pad and the engine rear
insulator.
1
1
2
FE12-0185b
15. Remove the front lower control arms (1).
16. Remove the rear engine insulator (2).
17. Remove the steering assembly. Refer to
Steering Gear Assembly Replacement
18. Remove the stabilizer bar. Refer to
19. Remove the cross member. Refer to
.
Body, Sheet Metal and Painting
Frame and Underbody
12-49
Installation Procedure:
FE12-0186b
1.
Install the cross member to the subframe. Do not tighten
the engine rear insulator bolts at this stage.
FE12-0187b
2.
Install the stabilizer bar.
3.
Install the steering assembly.
4.
Install the engine rear isolator bracket and tighten the
retaining nuts and bolts. Tighten the engine rear insulator
retaining bolts.
Torque: 75 Nm (Metric) 55.5lbf-ft (US English)
5.
Install the front lower control arms.
FE12-0188b
6.
Using a jack, raise and support the subframe together with
the steering assembly, the stabilizer bar, the front lower
control arms, the engine rear insulator bracket and the
engine rear insulator.
7.
Install the subframe retaining bolts.
Torque: 180 Nm (Metric) 133.2 lb-ft (US English)
8.
Remove the jack.
12-50
Frame and Underbody
Body, Sheet Metal and Painting
3
2
1
FE12-0189b
9.
Install the steering linkage outer tie rod end to steering
knuckle retaining nut (1).
10. Install the lower control arm to steering knuckle retaining
bolt (2).
11. Install the stabilizer shaft link to stabilizer bar retaining nut
(3).
FE12-0190b
12. Install the engine front insulator bracket retaining blots
and cross member front retaining bolts.
The engine front insulator bracket blots Torque:61 Nm
(Metric) 45.1 lb-ft (US English)
The cross member front retaining bolts Torque:75 Nm
(Metric) 55.5 lb-ft (US English)
FE12-0191b
13. Install the engine rear insulator bracket retaining blots
Torque: 84 Nm (Metric) 62.2 lb-ft (US English)
Body, Sheet Metal and Painting
Frame and Underbody
12-51
FE12-0179b
14. Connect the power steering gear inlet pipe/outlet pipe.
15. Install the steering column universal joints
16. Lower the vehicle.
17. Remove the special tool.
18. Install the front wheels.
12.6.4.3 Cross Member Replacement
Removal Procedure:
1
2
FE12-0192b
1.
Remove the subframe. Refer to
2.
Remove the cross member from the subframe.
3.
Remove the engine front insulator (1) from the cross
member.
4.
Remove the engine rear insulator (2) from the cross
member.
Installation Procedure:
1
2
FE12-0193b
1.
Install the engine rear insulator (2) to the cross member.
2.
Install the engine front insulator (1) to the cross member.
3.
Install the cross member the subframe.
4.
Install the subframe.
12-52
Frame and Underbody
Body, Sheet Metal and Painting
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст