Geely EC718, EC718RV, EC715, EC715RV. Manual part — 257
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 257
FE03-0043b
5.
Install the selector shaft and tighten the bolts.
Note
Do not damage the oil seal.
FE03-0044b
6.
Install the selector shaft sleeve.
FE03-0045b
7.
Install the selector shaft sleeve locking pin.
Transmission / Drive Axle
Manual Transmission
3-71
FE03-0046b
8.
Install the selector shaft outer retaining ring.
9.
Complete the shift control assembly assemble.
3.3.8.6 Shift Shaft Replacement
Removal Procedure:
FE03-0047b
1.
Remove the transmission assembly. Refer to
Transmission Assembly Replacement
.
2.
Remove the shift control assembly. Refer to
.
3.
Remove the reverse gear locating bolt.
FE03-0048b
4.
Remove the transmission case external connecting bolts.
3-72
Manual Transmission
Transmission / Drive Axle
FE03-0049b
5.
Remove the transmission case internal connecting bolts.
FE03-0050b
6.
Remove the transmission rear case.
1
1
2
FE03-0051b
7.
Remove the reverse shift rod.
Note
Before remove the retaining bolt (1), remove the
return spring end (2).
Transmission / Drive Axle
Manual Transmission
3-73
FE03-0052b
8.
Remove the 1st/2nd shift shaft retaining bolts.
FE03-0053b
9.
Remove the 1st/2nd shift shaft locking pin.
Note
Use a specified tool, otherwise the locking pin may
lock and can not be removed.
FE03-0054b
10. Rotate the 1st/2nd shift shaft 180˚ and pull upward to
remove it. Pay attention to 5th and reverse shift shaft
locking pin.
Note
The shift shaft and fork fitting is highly precise.
During the removal, it is prohibited to force the shift
shaft, as this will cause the shift shaft bending and
can not be used.
3-74
Manual Transmission
Transmission / Drive Axle
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст