Geely EC718, EC718RV, EC715, EC715RV. Manual part — 254
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 254
FE03-0172b
9.
Install the front sub frame and related components.
10. Install the front wheels.
11. Remove the engine hoisting tool.
FE03-0182b
12. Install the transmission upper retaining bolts.
FE03-0183b
13. Install the transmission left bracket assembly.
Transmission / Drive Axle
Manual Transmission
3-59
FE03-0166b
14. Install the clutch slave cylinder tube.
FE03-0184b
15. Install the clutch slave cylinder and bleed the air.
FE03-0185b
16. Install the gearshift control mechanism.
17. Connect the crankshaft position sensor wiring harness
connector.
18. Connect the vehicle speed sensor wiring harness
connector.
19. Connect the reverse lamp switch harness connector.
20. Install the battery bracket.
21. Connect the battery negative cable.
3.3.8.4 Shift Control Assembly Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
3-60
Manual Transmission
Transmission / Drive Axle
FE03-0011b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the intake pipe clamp.
FE03-0013b
3.
Remove the Canister solenoid valve components from the
Canister solenoid valve bracket.
FE03-0014b
4.
Remove the selector shaft rod retaining pin.
Transmission / Drive Axle
Manual Transmission
3-61
FE03-0015b
5.
Remove the selector shaft locating pin and the selector
shaft rod.
FE03-0016b
6.
Remove the selector shaft rod bolt.
FE03-0017b
7.
Remove the selector shaft locating pin and the selector
shaft rod.
3-62
Manual Transmission
Transmission / Drive Axle
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст