Geely EC718, EC718RV, EC715, EC715RV. Manual part — 424
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 424
FE11-1807b
3.
With a double-pipe gun evenly apply glass sealant to the
window glass edge to make sure that the sealant width is
even.
FE11-1803b
4.
With the help of an assistant, install the windshield glass
to the windshield frame.
5.
Press the windshield glass to bond the adhesive to the
seal strip, the windshield and the windshield frame to
retain the windshield.
6.
Let adhesive dry 24 h.
7.
spray water onto the windshield to check for water leaks.
If it leaks, dry the windshield and apply adhesives to the
leaking location. If it still leaks, remove the windshield and
repeat the entire repair procedure.
8.
Install the inside rearview mirror.
9.
Install the left / right A pillar garnish moldings.
10. Install the air inlet duct.
11. Install the wiper arms.
Body Electric
Glasses / Windows / Mirrors
11-209
11.5.8.10 Rear Window Replacement (Sedan)
Removal Procedure
1
FE11-1808b
1.
Remove the battery negative cable. Refer to
.
2.
Remove the left / right rear upper quarter panel. Refer to
Rear Quarter Upper Trim Panel Replacement
.
3.
Remove the rear parcel shelf. Refer to
Parcel Shelf Replacement (Sedan)
.
4.
Disconnect the rear window defroster electrical connector
(1).
FE11-1802b
5.
Cut the rear window glass adhesive with a thin steel wire.
Note
Wrap both end of the fine steel wire around a wood
handle, operate by with two people to facilitate the
removal.
FE11-1809b
6.
Remove the rear window glass from the rear window
frame.
Note
It takes two people to complete this step.
11-210
Glasses / Windows / Mirrors
Body Electric
FE11-1804b
7.
Removed the adhesive on the rear window glass with a
blade.
8.
Removed the adhesive on the rear window frame with a
blade.
9.
Clean the windshield inner surface with a cloth stained
soaked with industrial ethanol and water mixture with
50/50 volume ratio.
Installation Procedure:
FE11-1806b
1.
Spray the dedicated Geely glass sealant, with 8 mm (0.3
in) width 8 mm (0.3 in) height.
FE11-1807b
2.
With a double-pipe gun evenly apply glass sealant to the
window glass edge to make sure that the sealant width is
even.
Body Electric
Glasses / Windows / Mirrors
11-211
FE11-1809b
3.
With the help of an assistant, install the rear window glass
to the rear window frame.
4.
Press the rear window glass to bond the adhesive to the
seal strip, the rear window glass and the rear window
frame to retain the rear window.
5.
Let adhesive dry 24 h.
6.
Spray water onto the rear window to check for water leaks.
If it leaks, dry the rear window and apply adhesives to the
leaking location. If it still leaks, remove the rear window
and repeat the entire repair procedure.
7.
Connect the rear window defroster wiring harness
connector.
8.
Install the rear parcel shelf.
9.
Install left / right rear upper quarter panel.
10. Connect the battery negative cable.
11.5.8.11
Rear
Window
Replacement
(Hatchback)
Removal Procedure
1
2
FE11-1810c
1.
Remove the battery negative cable. Refer to
.
2.
Remove the wiper arm. Refer to
.
3.
Remove the hatchback trim panel. Refer to
Hatchback Inner Trim Panel Replacement
.
4.
Remove the high mounted brake lamp. Refer to
the
High Mounted Brake Lamp Replacement
.
5.
Disconnect Defroster harness connectors (1) and (2).
11-212
Glasses / Windows / Mirrors
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст