Lexus SC300 / Lexus SC400. Manual — part 129
Hood
COMPONENTS
–
BODY
Hood
BO–19
REMOVAL OF HOOD
(See page
1.
REMOVE HOOD SUPPORT FROM HOOD
Remove the bolt and disconnect the support from hood.
2. REMOVE
HOOD
(a) Disconnect the windshield washer hose from the body
side.
(b) Remove four bolts from hood hinge and remove the
hood.
HINT:
Be careful not to damage the body or glass with the
hood end.
INSTALLATION OF HOOD
(See page
1. INSTALL
HOOD
(a) Place the hood on the hood hinge and install four bolts
temporarily.
(b) Connect the windshield washer hose to the body side.
2.
INSTALL HOOD SUPPORT TO HOOD
Install the bolt and connect the support to hood.
Torque:
22 N
⋅
m (225 kgf
⋅
cm, 16 ft
⋅
lbf)
3. ADJUST
HOOD
(See page
)
BO–20
–
BODY
Hood
DISASSEMBLY OF HOOD
(See page
1.
REMOVE HOOD AUXILIARY CATCH HOOK
2.
REMOVE HOOD TO RADIATOR SUPPORT SEAL
Using a clip remover, remove clips and the seal.
3.
REMOVE HOOD INSULATOR
Using a clip remover, remove clips and the insulator.
4.
REMOVE HOOD CUSHION
Turn the cushions counter clockwise with your hand to re-
move it.
5.
REMOVE WINDOW WASHER HOSE
6.
REMOVE WINDOW WASHER NOZZLE
(a) Remove the cover.
(b) Using a screwdriver, remove the nozzle.
HINT:
Tape the screwdriver tip before use.
ASSEMBLY OF HOOD
(See page
ASSEMBLE HOOD PARTS BY FOLLOWING DISASSEMBLY
SEQUENCE IN REVERSE
–
BODY
Hood
BO–21
Hood–Related Parts
COMPONENTS
Front Fender
Front Bumper
BO–22
–
BODY
Hood (Hood–Related Parts)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст