Mercedes-Benz ML320. Manual — part 831
GF54.50-P-4100-02GH
Trip computer control module, design
n
The trip computer control module (TRIP, N41) consists of the
following components:
D
Electronics unit
D
LCD display
D
Reset button (left button, N41s1)
D
Mode button (right button, N41s2)
D
Inclination sensor (N41b1)
D
Glass breakage sensor (N41b2)
D
CAN interface
D
Alarm bus to all activity module (AAM, N10)
D
as of 1.9.00: Interface (RS 485) to electronic compass (B26)
Copyright DaimlerChrysler AG 18.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
GF54.30-P-2016A
Trip computer interface, location/task
7.7.99
MODEL
129, 140 as of 1.6.96
The trip computer receives the following information via the trip
computer interface (2 lines):
D
Driving speed
D
Mileage
D
Time
-----------------------------------------------------------------------------------------
The trip computer receives information about fuel consumption
directly from the fuel level sensor.
-----------------------------------------------------------------------------------------
Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
GF54.50-P-4100GH
Trip computer control module, location/task/design
24.3.00
MODEL
163 as of 1.9.00 with CODE (245) Trip computer
P54.50-0212-06
N41 Trip computer control module
Trip computer control module, location
The trip computer control module (TRIP, N41)
is located above the
inside rearview mirror unit.
Trip computer control module, task
GF54.50-P-4100-01GH
Trip computer control module, design
GF54.50-P-4100-02GH
Copyright DaimlerChrysler AG 18.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR54.50-P-0001GH
Remove, install trip computer
17.12.98
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175 with CODE (245) Trip computer
P54.50-0212-06
N41
Trip computer control module
P54.50-2030-06
1
Bolts
2
Overhead control panel
3
Connector
N41
Trip computer control module
Remove/install
1
Ensure that the ignition key is in position "0".
In order to prevent error codes.
AR54.10-P-0003A
2
Remove overhead control panel (2).
AR82.20-P-1100GH
3
Unscrew trip computer control module (N41)
from overhead control panel (2).
Unscrew screws (1) from control module.
4
Detach connector (3) from trip computer
control module (N41).
5
Install in the reverse order
6
Check that trip computer functions correctly.
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст