Mercedes-Benz ML320. Manual — part 832
GF54.50-P-4100-01GH
Trip computer control module, task
n
The trip compute control module (TRIP, N41) has the following tasks:
D
Display and calculate the current and average fuel consumption
D
Display and calculate the likely range
D
Display the trip time
D
Display the date
D
as of 1.9.00: Display the route (compass)
On vehicles with ATA also to:
D
Display the status of the ATA sensory system (on/OFF)
D
Output a "life sign" on the alarm bus to the all activity module
(AAM, N10)
D
Output an alarm signal on the alarm bus to the all activity
module (AAM, N10) when the glass breakage sensor (N41b2)
is triggered
D
Output an alarm signal on the alarm bus to the all activity
module (AAM, N10) when the inclination sensor (N41b2) is
triggered
Copyright DaimlerChrysler AG 18.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AD54.30-P-5000-03A
Directly controlled display instruments
troubleshooting chart IC
Directly controlled display instruments or indicator
lamp/warning message:
D
Outside temperature indicator
D
Fuel gauge
D
Oil pressure gauge (models 129 and 140 only)
D
Left turn signal indicator lamp
D
Right turn signal indicator lamp
D
High beam indicator lamp
D
Fuel reserve indicator lamp
D
Airbag SRS indicator lamp/MIL
D
AIRBAG OFF indicator lamp (only model 163 except
I
)
D
Low brake fluid level/parking brake indicator lamp (only brake
fluid direct)
(both functions via CAN on model 163)
D
Low windshield washer fluid level indicator lamp (except
models 163 and 168)
D
Low ECL indicator lamp (except models 163 and 168)
D
Generator charge indicator lamp
D
Seat belt reminder lamp
D
Seat belt/backrest lock reminder lamp
D
Exterior lamp failure indicator lamp
D
Hydraulic fluid level indicator lamp (models 202 and 210 only)
D
ADS MIL, suspension
D
Turn signal clicking
D
Seat belt reminder lamp
D
Light reminder lamp
D
Key reminder lamp
D
Soft top reminder lamp (model 170 only)
D
Steering lock warning lamp (
I
)
Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AD54.30-P-5000-02A
Display instruments controlled via CAN
troubleshooting chart IC
The following display instruments or indicator lamps/ malfunction
indicator lamps receive their information from the traction system
control module (N47) via CAN data buses (an appropriate message
appears in the display on vehicles with multi-function display):
D Total mileage recorder, trip odometer
D Electronic speedometer
D Low brake fluid level/parking brake indicator lamp (except model 163
parking brake indicator lamp only via CAN)
D Brake pad wear indicator lamp
D ABS MIL
D ETS, ASR, ESP indicator lamp
D ETS, ASR, ESP malfunction indicator lamp
Model 163 only:
The "Low-Range" indicator lamp receives its information from the
transfer case control module (N78) via CAN data buses.
The "Fog lamps" indicator lamp (only model 163 except
I
) receives
its information from the All-activity module (AAM, N10) via CAN data
buses.
Model 168 only:
The " Gear indicator " indicator lamp receives its information from the
gear recognition module (A61) or from automatic clutch control module
(N15/4) via CAN data buses.
The following display instruments or indicator lamps/
malfunction indicator lamps receive their information from the
injection system control module (N3) via CAN data buses (an
appropriate message appears in the display on vehicles with
multi-function display):
D Tachometer
D Low engine oil level lamp
D Engine coolant temperature
D Preglow indicator lamp (diesel only)
D Vehicle speed warning
D Vehicle speed limit warning
D Severe leak warning (
I
only), the fuel reserve indicator lamp
(A1e4) flashes
D Active Service System (ASSYST):
D Oil condition
D Oil level
D Oil temperature
D Mass volumetric efficiency (load moment)
D Engine speed, engine coolant temperature
Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
DCAG Ref. No.
This bulletin has been created and maintained in accordance with MBUSA-SLP 5.1, Document and Data Control, and
MBUSA-SLP 16.1, Control of Quality Records.
© 2002 Mercedes-Benz USA, LLC
All rights reserved. Reproduction or translation in whole
Mercedes-Benz Canada, Inc.
or in part is not permitted without authorization from the
Technical Information
publisher. Printed in the USA.
www.MBUSA.com
1-800-FOR-MERCedes
Service
Date:
February 2002
Order No.:
S-B-82.70/179A
Supersedes:
S-B-82.70/179
Group:
82
UPDATE:
SUBJECT:
Programming corrections—boldfaced print, pages 2 and 3 (This bulletin supersedes
S-B-82.70/179 dated December 2001)
MODELS 129, 163, 170, 203, 208, 210, 215, 220, 230, 463
MODEL YEAR 2002/2003
V60 PORTABLE TELEPHONE PROGRAMMING
The following programming instructions are for the V60 portable telephone.
Questions concerning telephone selection in accordance with customer cellular carrier choice and/or
telephone programming should be addressed with the Mercedes-Benz/Motorola V60 Technical Hotline toll
free at 1-877-668-8600.
The programming sequence differs between a TDMA telephone and a CDMA telephone.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст