Mercedes-Benz ML320. Manual — part 772
AP18.00-P-0101-06EG
Replace oil filter element, drain oil filter
Crankcase ventilation, cylinder head cover
Number
Designation
Engine
611.960/
961/962
Engine
612.961/
962/967
Engine
612.963
Engine
612.965/
966
Engine
613.960/
961
BA01.20-P-1002-01A
Screw of trim panel of cylinder head cover
to cylinder head cover
Nm
10
10
10
10
10
BA01.20-P-1003-01A
Screw attaching cover panel to charge air
distribution pipe
Nm
10
10
10
10
10
Crankcase ventilation, cylinder head cover
Number
Designation
Engine
646.951/961,
647
Engine
646.962/963
Engine
648
BA01.20-P-1002-01G
Bolt, trim panel of cylinder
head cover to cylinder head
Nm
9
9
9
BA01.20-P-1003-01G
Bolt, cover to charge air
distribution pipe.
Nm
9
9
9
Engine lubrication, oil filter
Number
Designation
Engine
611.960/
961/962
Engine
612.961/962/
963/990,
613.960/961
Engine
612.965/
966
Engine
646.951/961/
962/963/982/
983/984,
647, 648
BA18.20-P-1002-01G
Screw cap at oil filter
Nm
25
25
25
25
Socket wrench bit
103 589 02 09 00
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
P18.20-2022-01
1
Engine 611.961 as of 07.99, 611.962, 612, 613, 646, 647, 648:
Remove trim panel of cylinder head cover and trim panel of charge air distribution pipe.
2
Model 203, 211:
Remove fastening clamp (arrow) of fuel line.
3
Remove screw cap (1) with wrench socket
and take off together with oil filter element
(3).
4
Replace seal (2).
5
Insert new oil filter element (3) into oil filter housing.
6
Fasten the screw cap (1) with bolts using a socket wrench bit
.
7
Model 203, 211:
Install the fastening clamp (arrow) of the fuel line.
8
Engine 611.961 as of 07.99, 611.962, 612, 613, 646, 647, 648:
Install the cylinder head cover trim panel and the charge air distribution pipe trim panel
.
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 2
AF01.40-P-4000AU
Oil leak out of drain opening on left side of engine (cylinder 6)
21.1.98
ENGINE
112 in MODEL 129, 163, 170, 202, 203, 208, 210, 220
ENGINE
113 in MODEL 129, 163, 202, 208, 210, 215, 220
ENGINE
112 in MODEL 463
ENGINE
113 in MODEL 463
Modification notes
23.3.99
Supersedes STIP no. 01.40-004 dated 15.1.98
Validity and cause modified
Damage code
Cause
Remedy
Threaded connection of oil duct in
front of crankcase V is installed without or
with a damaged sealing ring.
Consequently, engine oil in V of crankcase
below intake module. Engine oil flows out of
drain opening on left side of engine behind
cylinder 6 and 8 resp.
1
Remove intake module
2
Replace sealing ring
Parts ordering notes
Part no.
Designation
Quantity
023 997 70 48
Sealing ring
1
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
BT27.10-P-0006-01W
Oil pan and overflow tube modified
k
TRANSMISSION
722.901
P27.10-2139-06
To improve fluid supply to the transmission,
the transmission oil pan and the overflow tube
have been redesigned.
The characteristic sloped surface (arrow) can
be used to identify the new oil pan (1). This oil
pan configuration should be installed only
together with the white overflow tube (2).
The fluid temperatures used as references for
checking and refilling are different with the
new components.
Whenever a transmission is removed for repairs, the earlier oil pan (3) with the black overflow
tube (4) should be replaced by the new sloped-surface version (1) with the white overflow tube
(2).
P27.10-2140-03
Copyright DaimlerChrysler AG 28.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст