Great Wall Florid. Manual — part 16
GWFLORID Maintenance Manual
62
6. Remove the output shaft's 2nd gear synchronizer ring,
2nd gear needle bearing, and the 2nd gear subassem-
bly retaining ring.
7. Remove the shaft retainer from the No. 1 synchronizer
gear hub of the output shaft.
8. Remove the output shaft's No. 1 synchronizer compo-
nents and the 1st driven gear.
9. Remove the needle bearing from the output shaft's 1st
driven gear subassembly.
63
Transmission
10. Remove each component of output shaft's No. 1 syn-
chronizer.
11. Remove the front tapered roller bearing.
GWFLORID Maintenance Manual
64
Disassembling the Shift Cover Subassembly
Components
Shift lever assembly
Dust cover
T oil seal
Gear shifting block
No. 2 spring seat
Pressure spring
Shaft retainer
Gasket
Lock plate
Shaft retainer
Elastic cylindrical pin
Shift guide block
Select lever subassembly
Manipulation lid
T oil seal
1. Remove the shift lever's elastic cylindrical pin.
Set bolt
38.0
: Specified torque
N·m
65
Transmission
2. Remove the shaft retainer on the shift lever and the se-
lect lever.
3. Remove the lock plate.
4. Remove the pressure torsion spring.
5. Remove the No. 2 spring seat.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст