Great Wall Florid. Manual — part 15
GWFLORID Maintenance Manual
58
6. Remove the input shaft's 5th gear thrust washer.
7. Remove the steel balls from the 5th gear thrust washer
of the input shaft.
8. Remove the 4th gear subassembly, 4th gear needle
bearing, 4th gear synchronizer ring, and the 4th gear
bearing washer (4 types of part).
9. Remove the shaft retainer from the input shaft's No. 2
synchronizer gear hub.
59
Transmission
10. Remove each component of the input shaft's No.2 syn-
chronizer.
11. Remove the input shaft's 3rd gear synchronizer ring
and the 3rd gear subassembly.
12. Remove the needle bearing from the 3rd gear of input
shaft.
GWFLORID Maintenance Manual
60
Disassembling the Output Shaft Subassembly
Components
Front tapered
roller bearing
Output shaft
Needle bearing
1st gear gear
subassembly
1st gear
synchronizer ring
No. 1 gear sleeve/No. 1
gear hub
No. 1 Slider
Spring expansion ring
Shaft retainer
Retaining ring
Needle bearing
2nd gear synchronizer ring
2nd gear gear subassembly
3rd driven gear
Spacer
4th driven gear
5th driven gear
Shaft retainer
Rear tapered
roller bearing
1. Remove the output shaft's rear tapered roller bearing.
61
Transmission
2. Remove the output shaft's 5th driven gear shaft retainer.
3. Remove together the output shaft's 5th and 4th gear
driven gear.
4. Remove the output shaft spacer.
5. Remove the output shaft's 3rd driven gear and the 2nd
gear subassembly spacer.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст