Great Wall Florid. Manual — part 14
GWFLORID Maintenance Manual
54
13. Remove the No. 2 gear shift fork shaft, No. 2 gear shift
fork, and No. 2 guide block.
14. Remove the input and output shaft subassembly.
15. Remove the differential subassembly.
16. Remove the magnetic body from the inside of the
clutch housing.
55
Transmission
17. Remove the oil drain slot from the inside of the transmis-
sion case.
18. Remove the T oil seal with a screwdriver from the
clutch housing.
19. Remove the release fork and the release bearing from
the clutch housing.
20. Remove the set bolts of the release fork from the
clutch housing.
GWFLORID Maintenance Manual
56
Disassembling the Input Shaft Subassembly
Components
Input shaft
Rear ball bearing
No. 3 gear sleeve/
No. 3 gear hub
No. 3 Slider
Spring expansion
ring
5th gear
synchronizer ring
5th gear gear
subassembly
Needle bearing
Retaining ring
Shaft retainer
Steel ball
5th gear thrust washer
Needle bearing
4th gear subassembly
4th gear synchronizer ring
Retaining ring
Shaft retainer
No. 2 gear sleeve/No. 2
gear hub
No. 2 Slider
Spring expansion ring
3rd gear
synchronizer ring
Needle bearing
Front ball bearing
3rd gear gear subassembly
Spring expansion ring
Spring expansion
ring
1. Remove the input shaft's ball bearing.
57
Transmission
2. Remove each component from the 3rd synchronizer.
3. Remove the 5th gear needle bearing.
4. Remove the retaining ring.
5. Remove the shaft retainer.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст