Great Wall Florid. Manual — part 61
GWFLORID Maintenance Manual
242
Dashboard
Components
Dashboard removal
1. Remove the auxiliary facia console.
(a) Take down the front ash tray assembly
(b) Take down the auxiliary facia console decorative carpet.
(c) Remove one screw.
(d) Remove the parking brake lever panel.
(e) Remove the shift lever cap.
(f) Remove the auxiliary facia console assembly.
2. Remove the left & right trim strip assembly of the dash-
board.
Front ash tray assembly
Dashboard top assembly
Combination switch
cover assembly
Dashboard lower framework
assembly
Glove box
assembly
Fuse box
Dashboard left trim strip
Dashboard center console
left trim strip
Ash tray
assembly
Coin box bottom
Coin box cover
Front ash tray assembly
Dashboard center console right
trim strip assembly
Small glove
box assembly
Shift handle cover assembly
Auxiliary facia console
Dashboard center console assembly
Air-conditioner
center right air outlet
tray assembly
Combination meter hood assembly
Side air outlet decorative cap
Air-conditioner air outlet wind-ball assembly
Air-conditioner air outlet tray assembly
Air-conditioner left air
outlet tray assembly
Dashboard right
trim strip
Parking brake lever panel
Auxiliary facia console
decorative carpet
Screw
Buckle
Auxiliary facia console
Dashboard right trim
strip assembly
243
Vehicle Body
3. Remove the dashboard center console left & right side
trim strip assembly.
4. Remove the glove box assembly.
5. Remove the combination switch cover assembly.
(a) Remove the three screws.
(b) Pry the upper and lower cover off, and remove the up-
per and lower cover of the combination switch.
6. Remove the combination meter hood assembly.
(a) Remove the two buckles.
(b) Remove the combination meter hood assembly.
7. Remove the dashboard center console assembly.
(a) Remove the air-conditioner's control buttons.
(b) Remove the four screws.
(c) Remove the dashboard center console assembly.
8. Remove the CD player (refer to CD player removal for
details).
9. Remove the left and right A-pillar protective panel (refer
to inner decorative panel removal for details).
10. Remove the combination meter (refer to combination
meter removal for details).
Left trim strip
Screw
Buckle
Glove box
assembly
Right trim
strip
Combination switch cover assembly
Combination
meter hood
Dashboard center console assembly
Screw
244
GWFLORID Maintenance Manual
11. Remove the dashboard top assembly.
(a) Remove the four screws.
(b) Remove the dashboard top assembly.
12. Remove the air conditioner controller (refer to air con-
ditioner controller removal for details).
13. Remove the small glove box assembly.
(a) Remove the four screws.
(b) Remove the small glove box assembly.
14. Remove the ash tray assembly.
(a) Remove the two screws.
(b) Remove the ash tray assembly.
15. Remove the coin box cover.
16. Remove the coin box bottom.
(a) Remove the two buckles.
(b) Remove the coin box bottom.
17. Remove the combination switch (refer to combination
switch removal for details).
Small glove box assembly
Ash tray assembly
Coin box cover
Screw
Screw
Dashboard top assembly
Screw
Screw
Coin box
bottom
Buckle
Buckle
245
Vehicle Body
18. Remove the dashboard bottom and brace reinforce-
ment assembly.
(a) Remove the engine hood handle assembly (refer to
engine hood handle removal for details).
(b) Remove the ten bolts.
(c) Pull the electrical connector out, and remove the dash-
board bottom and brace reinforcement assembly.
19. Remove the dashboard bottom and brace reinforce-
ment assembly.
(a) Remove the two buckles.
(b) Remove the two screws.
(c) Remove the two nuts.
(d) Remove the dashboard lower framework assembly.
20. For dashboard installation, please simply reverse the
removal steps.
Bolt
Brace reinforcement assembly
Buckle
Nut
Nut
Buckle
Dashboard lower framework assembly
Screw
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст