Great Wall Florid. Manual — part 63
GWFLORID Maintenance Manual
250
6. Install the front door glass run.
7. Install the front door window assembly.
Install the window on door chamber and fix the window and
window regulator with two bolts.
4. Install the window regulator.
(a) Install the regulator via the auxiliary hole.
(b) Install the six mounting bolts of the regulator.
5. Install the guide rail and bolts on the front door window
guide rail assembly.
9. Install the door inner decoration board.
10. Install the front door inside handle.
(a) Push the door handle into the door panel and slide it
backward.
(b) Screw in the screws.
11. Insert the wire harness of the front door power window
switch and install the door handle.
8. Install the front door external weatherstrip.
Lower the window and make the external weatherstrip
wedge into the seam of the door's external panel.
Front door protector LH
Front door
assembly LH
Window regulator
assembly
Front door
assembly LH
Front door
window LH
Front door assembly LH
Front door external
weatherstrip LH
Front door armrest LH
Front door inside
handle LH
251
Vehicle Body
Rear Door Assembly
Components
Rear door removal
1. Remove the rear door inner decoration board.
(a) Remove the rear door armrest screw and armrest.
(b) Remove the inside handle screw and inside handle.
(c) Remove the electrical switch, pull out the wire harness,
and then remove the rear door power window switch.
(d) Remove the rear door internal weatherstrip.
(e) Remove the rear door protector trim strip.
(f) Insert a buckle screwdriver between the fixed buckle
and inner decoration board to pry them loose.
Caution: Before using a buckle screwdriver, make sure
to wrap its head in tape.
(g) Take the door inner decoration board off.
Rear door outside triangu-
lar protector assembly LH
Rear door assembly LH
Rear door window
rear guide rail LH
Rear door inner triangular
protector assembly LH
Rear door outside
handle assembly LH
Rear door internal weatherstrip LH
Rear door
window
regulator LH
Rear door inner decoration board assembly LH
Rear door power window switch LH
Rear door protector trim strip LH
Rear door weatherstrip LH
Rear door glass run LH
Rear door window LH
Rear door external
weatherstrip LH
Rear door window front
guide rail LH
Rear door retainer LH
Rear door protector
trim strip LH
Rear door inner
decoration board
assembly LH
Rear door power
window switch LH
Rear door internal
weatherstrip LH
Rear door armrest LH
GWFLORID Maintenance Manual
252
2. Remove the rear door external weatherstrip.
Lower the window and manually grasp the weatherstrip
firmly, then pull it up to remove.
3. Remove the rear door window assembly.
(a) Pull the rear door regulator down in a position that en-
ables the rocker to turn freely, and then lower the win-
dow. Finally make the rocker slide out of the guide rail
below the window.
(b) Pull the window upwards and then tilt it to remove.
4. Remove the rear door glass run.
5. Remove the rear door window guide rail assembly.
6. Remove the window regulator.
(a) Remove the four mounting bolts of the regulator
bracket.
(b) Remove the regulator via the auxiliary hole.
7. Remove the vehicle inner lock button.
8. Rear door window assembly replacement.
(a) Adjust the rear door window to make the window
bracket mounting bolts level with the door inner
decoration board mounting hole.
(b) Remove the window bracket mounting bolts to take the
window out for replacement.
Rear door installation
1. Coat grease.
Coat MP grease on the components before installing them.
(a) Coat MP grease to sliding surfaces and the gears of
window regulator.
Caution: Do not coat MP grease to the spring of the
window regulator.
(b) Coat MP grease to the sliding surface of the door lock.
4. Install the window regulator.
(a) Install the regulator via the auxiliary hole.
(b) Install the four regulator's mounting bolts.
2. Install the door outside handle with lock cylinder and
door lock.
(a) Install the lock cylinder on the door outside handle with
spring clasp.
(b) Install the door outside handle and lock cylinder with
two bolts.
(c) Install the door lock with three bolts.
(d) Connect the control lever to the door outside handle.
3. Install the door inner lock button and connect the con-
trol lever.
Rear door window rear
guide rail LH
Rear door glass run LH
Rear door window LH
Rear door external
weatherstrip LH
Rear door
window front
guide rail LH
Rear door window regulator LH
Rear door window regulator LH
Rear door
assembly LH
Rear door outside
handle assembly LH
Rear door window
regulator LH
Rear door lock
assembly LH
Rear door
assembly
LH
Rear door outside handle assembly LH
Rear door window regulator LH
Rear door
assembly LH
Rear door outside handle
assembly LH
Rear door
assembly LH
Rear door lock
assembly LH
253
Vehicle Body
5. Install the guide rail and bolts on the rear door window
guide rail assembly.
6. Install the rear door glass run.
7. Install the rear door window assembly.
Pull the regulator down in a position that enables the rocker
to turn freely, install the window into the door chamber, then
make the rocker of the regulator smoothly slide out of the
guide rail below the window.
Rear door assembly LH
Rear door window
rear guide rail LH
Rear door glass run LH
Rear door window LH
Rear door window
front guide rail LH
Rear door external weatherstrip LH
Rear door
assembly LH
8. Install the rear door external weatherstrip.
Lower the window and make the external weatherstrip
wedge into the seam of the door's external panel.
9. Install the door inner decoration board.
10. Install the door inner handle.
(a) Push the door handle into the door panel and make it
slide backward.
(b) Screw in the screws.
11. Insert the wire harness of the rear door power window
switch and install the door handle.
Rear door inner decoration board assembly LH
Rear door power
window switch LH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст