Mazda 6. Manual — part 322
T–48
INTERIOR LIGHTING SYSTEM
FRONT MAP LIGHT REMOVAL/INSTALLATION
A6E811451310W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Front Map Light Removal Note
1. Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the front map light.
2. Push the hooks to remove the front map light.
End Of Sie
FRONT MAP LIGHT INSPECTION
A6E811451310W02
1. Remove the front map light. (See
T–48 FRONT MAP LIGHT REMOVAL/INSTALLATION
.)
2. Inspect for continuity between the front map light
terminals using an ohmmeter.
• If not as specified, replace the front map light.
End Of Sie
INTERIOR LIGHTING SYSTEM
1
)
2
Connector
3
Socket
4
Map light bulb
A6E8114W102
A6E8114W103
A6E8114W118
A6E8114W117
INTERIOR LIGHTING SYSTEM
T–49
T
REAR MAP LIGHT REMOVAL/INSTALLATION
A6E811451311W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Rear Map Light Removal Note
1. Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the rear map light.
2. Push the hooks to remove the rear map light.
End Of Sie
REAR MAP LIGHT INSPECTION
A6E811451311W02
1. Remove the rear map light. (See
T–49 REAR MAP LIGHT REMOVAL/INSTALLATION
.)
2. Inspect for continuity between the rear map light
terminals using an ohmmeter.
• If not as specified, replace the rear map light.
End Of Sie
1
2
Connector
3
Socket
4
Rear map light bulb
A6E8114W104
A6E8114W105
A6E8114W128
A6E8114W127
T–50
INTERIOR LIGHTING SYSTEM
CARGO COMPARTMENT LIGHT REMOVAL/INSTALLATION
A6E811451441W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
End Of Sie
CARGO COMPARTMENT LIGHT INSPECTION
A6E811451441W02
1. Remove the cargo compartment light. (See
T–50 CARGO COMPARTMENT LIGHT REMOVAL/
2. Inspect for continuity between the cargo
compartment light terminals using an ohmmeter.
• If not as specified, replace the cargo
compartment light.
End Of Sie
CARGO COMPARTMENT LIGHT SWITCH INSPECTION
A6E811451442W01
1. Remove the liftgate lower trim. (See
S–95 LIFTGATE LOWER TRIM REMOVAL/INSTALLATION
)
2. Disconnect the cargo compartment light switch connector.
3. Inspect for continuity between the cargo
compartment light switch terminals using an
ohmmeter.
• If not as specified, replace the liftgate lock.
End Of Sie
1
Cargo compartment light
2
Connector
3
Lens
4
Cargo compartment light bulb
A6E8114W101
A6E8114W111
A6E8114W114
A6E8114W119
A6E8114W120
INTERIOR LIGHTING SYSTEM
T–51
T
TRUNK COMPARTMENT LIGHT BULB REMOVAL/INSTALLATION
A6E811451440W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
End Of Sie
TRUNK COMPARTMENT LIGHT SWITCH INSPECTION
A6E811451440W02
1. Remove the trunk lid trim. (See
S–93 TRUNK LID TRIM REMOVAL/INSTALLATION
2. Disconnect the trunk compartment light switch connector.
3. Inspect for continuity between the trunk
compartment light switch terminals using an
ohmmeter.
• If not as specified, replace the trunk lock.
End Of Sie
COURTESY LIGHT BULB REMOVAL/INSTALLATION
A6E811469971W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
End Of Sie
1
Lens
2
Trunk compartment light bulb
A6E8114W112
A6E8114W119
A6E8114W121
1
Lens
2
Courtesy light bulb
A6E8114W110
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст