Mazda 6. Manual — part 320
T–40
EXTERIOR LIGHTING SYSTEM
LIGHT SWITCH INSPECTION
A6E811266121W02
Light switch LH side
1. Remove the light switch. (See
T–39 LIGHT SWITCH REMOVAL/INSTALLATION
)
2. Inspect for continuity between the light switch terminals using an ohmmeter.
• If not as specified, replace the light switch.
Headlight switch
Turn switch
A6E8112W144
A6E8112W129
A6E8112W145
A6E8112W130
EXTERIOR LIGHTING SYSTEM
T–41
T
Light switch RH side
1. Remove the light switch. (See
T–39 LIGHT SWITCH REMOVAL/INSTALLATION
)
2. Inspect for continuity between the light switch
terminals using an ohmmeter.
• If not as specified, replace the light switch.
Headlight switch
Turn switch
End Of Sie
HAZARD WARNING SWITCH INSPECTION
A6E811266401W01
1. Inspection the hazard warning switch. (See
U–47 CLIMATE CONTROL UNIT INSPECTION
End Of Sie
A6E8112W146
A6E8112W131
A6E8112W147
A6E8112W139
T–42
EXTERIOR LIGHTING SYSTEM
FRONT AND REAR FOG LIGHT SWITCH INSPECTION
A6E811266402W01
Light switch LH side
1. Remove the light switch. (See
T–39 LIGHT SWITCH REMOVAL/INSTALLATION
.)
2. Inspect for continuity between the light switch
terminals using an ohmmeter.
• If not as specified, replace the light switch.
Light switch RH side
1. Remove the light switch. (See
T–39 LIGHT SWITCH REMOVAL/INSTALLATION
.)
2. Inspect for continuity between the light switch
terminals using an ohmmeter.
• If not as specified, replace the light switch.
End Of Sie
A6E8112W148
A6E8112W140
A6E8112W167
A6E8112W166
EXTERIOR LIGHTING SYSTEM
T–43
T
HEADLIGHT LEVELING SWITCH REMOVAL/INSTALLATION
A6E811251030W08
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Headlight Leveling Switch Removal Note
1. Insert your hand from the lower side of the dashboard and squeeze the tabs of the headlight leveling switch.
2. Pull the headlight leveling switch forward to remove it.
End Of Sie
HEADLIGHT LEVELING SWITCH INSPECTION
A6E811251030W09
1. Remove the headlight leveling switch. (See
T–43 HEADLIGHT LEVELING SWITCH REMOVAL/
2. Inspect for continuity between the headlight
leveling switch terminals using an ohmmeter.
• If not as specified, replace the headlight
leveling switch.
End Of Sie
BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION
A6E811217640W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
End Of Sie
1
Headlight leveling switch (See
2
Connector
A6E8112W138
A6E8112W152
A6E8112W151
1
Connector
2
Back-up light switch
A6E8112W104
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст