Mazda 6. Manual — part 186
H–14
CLUTCH UNIT
4. Rotate the flywheel and check for misaligned
diaphragm spring fingers.
• If not as specified, replace the clutch cover.
Misalignment
0.6 mm {0.024 in} max.
End Of Sie
CLUTCH DISC INSPECTION
A6E492016460W01
1. Using vernier calipers, measure the thickness of
the lining at a rivet head on both sides.
• Replace the clutch disc if its thickness is less
than the minimum.
Thickness
0.3 mm {0.012 in} min.
2. Measure the clutch disc runout using a dial
indicator.
• If the runout is excessive, replace the clutch
disc.
Runout
0.7 mm {0.028 in} max.
End Of Sie
CLUTCH RELEASE COLLAR INSPECTION
A6E492016510W01
Caution
• Cleaning the clutch release collar with cleaning fluids or a steam cleaner can
wash the grease out of the sealed bearing.
1. Turn the collar while applying force in the axial
direction.
• If the collar sticks or has excessive
resistance, replace the clutch release collar.
End Of Sie
XME4920W012
A6E4920W007
XME4920W014
XME4920W015
FLYWHEEL
H–15
H
FLYWHEEL INSPECTION
A6E492211500W01
1. Install a dial gauge on the cylinder block.
2. Measure the flywheel runout using a dial
indicator.
• If the runout is excessive, replace the
flywheel.
Runout
0.1 mm {0.004 in} max.
End Of Sie
FLYWHEEL
XME4922W001
J–1
J
J
MANUAL TRANSAXLE
LOCATION INDEX . . . . . . . . . . . . . J-2
MANUAL TRANSAXLE LOCATION INDEX . . J-2
MANUAL TRANSAXLE. . . . . . . . . . .. J-3
REMOVAL/INSTALLATION . . . . . . . .. J-4
INSPECTION . . . . . . . . . . . . . J-5
INSTALLATION. . . . . . . . . . . . . J-5
J–2
LOCATION INDEX
MANUAL TRANSAXLE LOCATION INDEX
A6E510001036W01
.
End Of Sie
LOCATION INDEX
A6E5100W001
1
Oil seal (differential)
(See
)
2
Vehicle speedometer sensor
(See
J–4 VEHICLE SPEEDOMETER SENSOR
)
(See
J–5 VEHICLE SPEEDOMETER SENSOR
3
Manual transaxle
(See
)
4
Shift mechanism
(See
)
5
Transaxle oil
(See
(See
)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст