Mazda CX 7. Manual — part 411
INTERIOR TRIM
09-17–11
09-17
2. Remove the screws.
3. Remove the ventilator grille.
4. Remove the tab A.
5. Remove the demister grille.
6. Install in the reverse order of removal.
Passenger’s Side
1. Disconnect the negative battery cable.
2. Remove the following parts:
(1) A-pillar lower trim (passenger's side) (See 09-17-16 A-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
(2) A-pillar trim (passenger's side) (See 09-17-15 A-PILLAR TRIM REMOVAL/INSTALLATION.)
(3) Front scuff plate inner (See 09-17-19 FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
(4) Front side trim (See 09-17-18 FRONT SIDE TRIM REMOVAL/INSTALLATION.)
(5) Console panel (See 09-17-15 CONSOLE PANEL REMOVAL/INSTALLATION.)
(6) Console (See 09-17-13 CONSOLE REMOVAL/INSTALLATION.)
(7) Hood release lever (See 09-14-25 HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)
(8) Lower panel (See 09-17-9 LOWER PANEL REMOVAL/INSTALLATION.)
(9) Center panel (See 09-17-8 CENTER PANEL REMOVAL/INSTALLATION.)
(10)Passenger-side air bag module (See 08-10-7 PASSENGER-SIDE AIR BAG MODULE REMOVAL/
INSTALLATION.)
3. Remove the screws A.
4. Remove the bracket.
5. Remove the screws B.
6. Remove the ventilator grille.
7. Remove the tab C.
8. Remove the demister grille.
9. Install in the reverse order of removal.
SCREW
TAB A
DRIVER-SIDE
DEMISTER GRILLE
DRIVER-SIDE
VENTILATOR
GRILLE
DASH BOARD
GARNISH
A
acxuuw00000879
AIR BAG MODULE
BRACKET
SCREW A
SCREW B
TAB C
PASSENGER-SIDE
DEMISTER GRILLE
PASSENGER-SIDE
VENTILATOR GRILLE
C
acxuuw00000880
INTERIOR TRIM
09-17–12
Center
1. Remove the following parts:
(1) Front scuff plate inner (See 09-17-19 FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
(2) Front side trim (See 09-17-18 FRONT SIDE TRIM REMOVAL/INSTALLATION.)
(3) Console panel (See 09-17-15 CONSOLE PANEL REMOVAL/INSTALLATION.)
(4) Console (See 09-17-13 CONSOLE REMOVAL/INSTALLATION.)
(5) Hood release lever (See 09-14-25 HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)
(6) Lower panel (See 09-17-9 LOWER PANEL REMOVAL/INSTALLATION.)
(7) Center panel (See 09-17-8 CENTER PANEL REMOVAL/INSTALLATION.)
2. Remove the screws.
3. Remove the ventilator grille.
4. Install in the reverse order of removal.
End Of Sie
SAIL GARNISH REMOVAL/INSTALLATION
id091700805000
1. Pull the sail garnish outward and detach clips A
and B.
2. Remove the sail garnish.
3. Install in the reverse order of removal.
End Of Sie
KNEE BOLSTER REMOVAL/INSTALLATION
id091700804000
1. Remove the following parts:
(1) Console panel (See 09-17-15 CONSOLE PANEL REMOVAL/INSTALLATION.)
(2) Console (See 09-17-13 CONSOLE REMOVAL/INSTALLATION.)
(3) Front scuff plate inner (driver’s side) (See 09-17-19 FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
(4) Front side trim (driver’s side) (See 09-17-18 FRONT SIDE TRIM REMOVAL/INSTALLATION.)
(5) Hood release lever (See 09-14-25 HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)
(6) Lower panel (driver’s side) (See 09-17-9 LOWER PANEL REMOVAL/INSTALLATION.)
2. Remove the bolts.
3. Remove the knee bolster.
4. Install in the reverse order of removal.
End Of Sie
WM: CONSOLE
SCREW
SCREW
VENTILATOR
GRILLE
acxuuw00000881
CLIP A
CLIP B
A
B
SAIL GARNISH
acxuuw00000918
KNEE BOLSTER
BOLT
1.6—2.2 N·m
{16.4—22.4 kgf·cm,
14.2—19.4 in·lbf}
acxuuw00000794
INTERIOR TRIM
09-17–13
09-17
CONSOLE REMOVAL/INSTALLATION
id091700801200
1. Disconnect the negative battery cable.
2. Remove the console panel. (See 09-17-15 CONSOLE PANEL REMOVAL/INSTALLATION.)
3. Pull the panel upward and detach clips A, B and
tabs C.
4. Disconnect the accessory socket connector.
5. Disconnect the seat warmer switch connectors.
(vehicles with seat warmer system)
6. Remove the panel.
7. Remove the covers.
8. Remove the fasteners and screws.
9. Remove the pins A.
10. Remove the console.
11. Install in the reverse order of removal.
End Of Sie
B
B
B
B
A
A
B
B
C
C
CLIP B
CLIP A
TAB C
PANEL
CUP HOLDER
acxuuw00000666
SCREW
SCREW
COVER
COVER
COVER
COVER
PIN A
SCREW
FASTENER
A
A
A
A
acxuuw00000667
INTERIOR TRIM
09-17–14
CONSOLE DISASSEMBLY/ASSEMBLY
id091700801300
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
End Of Sie
B
A
B
A
C
D
D
D
D
D
D
D
D
C
C
C
C
C
B
B
A
B
A
SCREW
1
4
5
3
2
CLIP A
CLIP D
CLIP C
TAB B
6
6
acxuuw00000668
1
Storage box
2
Console cover
3
Bracket
4
Hole cover
5
Console lid
6
Console
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст