Mazda Protege 5. Manual — part 304
ON-BOARD DIAGNOSTIC [AUDIO]
09–02B–10
End Of Sie
DTC 05:ER01
A3U090266900W18
Diagnostic procedure
End Of Sie
DTC 05:ER07
A3U090266900W19
Diagnostic procedure
End Of Sie
DTC 05:Er01
CD changer (external type)
DETECTION
CONDITION
•
Changer function does not operate.
POSSIBLE
CAUSE
•
Defective CD (broken or foreign material)
•
Magazine malfunction
•
CD changer (external type) malfunction
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN CD
CHANGER OR OTHER PARTS
•
Operate changer function.
•
Is function okay?
Yes
Go to Step 4.
No
Not able to change particular CD. Go to next step.
Not able to change any CD.
Go to Step 3.
2
INSPECT CD
•
Inspect condition of CD where error has occurred.
•
Is CD okay?
Note
•
In some cases, not all CD-R/CD-RW will play.
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD,
then go to next step.
3
INSPECT MAGAZINE
•
Inspect magazine.
•
Is magazine okay?
Yes
Go to next step.
No
Repair or replace magazine, then go to next step.
4
INSPECT CD CHANGER (EXTERNAL TYPE)
•
Clear DTC.
•
Operate changer.
•
Start on-board diagnostic test mode.
•
Is DTC 05:Er01 displayed?
Yes
Replace CD changer (external type).
No
Troubleshooting completed.
DTC 05:Er07
CD changer (external type)
DETECTION
CONDITION
Note
•
When error occurs, error message “CHECK CD” is displayed in the LCD.
•
Base unit detects CD reading error.
POSSIBLE
CAUSE
•
Defective CD (scratches or dirt)
•
CD changer (external type) malfunction
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN CD
CHANGER OR OTHER PARTS
•
Play all CD in magazine.
•
Is CD changer able to read them properly?
Yes
Go to Step 3.
No
Not able to change particular CD.
Go to next step.
Not able to change any CD.
Go to Step 3.
2
INSPECT CD
•
Inspect condition of CD where error has occurred.
•
Is CD okay?
Note
•
In some cases, not all CD-R/CD-RW will play.
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then
go to next step.
3
INSPECT CD CHANGER (EXTERNAL TYPE)
•
Clear DTC.
•
Insert and play CD with no defect.
•
Start on-board diagnostic test mode.
•
Is DTC 05:Er07 displayed?
Yes
Replace CD changer (external type).
No
Troubleshooting completed.
1712-1U-01G(09-02B).fm 10 ページ 2001年6月29日 金曜日 午前10時27分
ON-BOARD DIAGNOSTIC [AUDIO]
09–02B–11
09–02B
DTC 06:ER01
A3U090266900W20
Diagnostic procedure
End Of Sie
DTC 06:ER02
A3U090266900W21
Diagnostic procedure
End Of Sie
DTC 06:Er01
CD changer (upper module)
DETECTION
CONDITION
•
CD changer (upper module) cannot perform insert, eject, and disc change commands.
POSSIBLE
CAUSE
•
Defective CD (broken or foreign material stuck/attached)
•
CD changer (upper module) malfunction
STEP
INSPECTION
ACTION
1
•
Is CD able to be ejected?
Yes
Go to next step.
No
Replace CD changer (upper module).
2
INSPECT CD
•
Inspect condition of CD where error has occurred.
•
Is CD okay?
Note
•
In some cases, not all CD-R/CD-RW will play.
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then
go to next step.
3
INSPECT CD CHANGER (UPPER MODULE)
•
Clear DTC.
•
Insert and eject CD with no defect.
•
Start on-board diagnostic test mode.
•
Is DTC 06:Er01 displayed?
Yes
Replace CD changer (upper module).
No
Troubleshooting completed.
DTC 06:Er02
CD changer (upper module)
DETECTION
CONDITION
Note
•
When error occurs, error message “CHECK CD” is displayed in the LCD.
•
Can not play CD normally or change tracks.
POSSIBLE
CAUSE
•
Defective CD (scratches or dirt)
•
CD changer (upper module) malfunction
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN CD
CHANGER (UPPER MODULE) OR CD
•
Play all CDs in changer and select other song
(change tracks).
•
Is CD changer able to change tracks?
Yes
Go to Step 3.
No
Not able to change
particular tracks.
Go to next step.
Not able to change any
tracks.
Change CD and perform
tracks-change again.
•
If CD changer changes
tracks, then go to Step 3.
•
If not, replace CD
changer (upper module).
2
INSPECT CD
•
Inspect condition of CD where error has occurred.
•
Is CD okay?
Note
•
In some cases, not all CD-R/CD-RW will play.
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then
go to next step.
3
INSPECT CD CHANGER (UPPER MODULE)
•
Clear DTC.
•
Play CD and select other song (change tracks).
•
Start on-board diagnostic test mode.
•
Is DTC 06:Er02 displayed?
Yes
Replace CD changer (upper module).
No
Troubleshooting completed.
1712-1U-01G(09-02B).fm 11 ページ 2001年6月29日 金曜日 午前10時27分
ON-BOARD DIAGNOSTIC [AUDIO]
09–02B–12
DTC 06:ER07
A3U090266900W22
Diagnostic procedure
End Of Sie
DTC 07:ER01
A3U090266900W23
Diagnostic procedure
End Of Sie
DTC 06:Er07
CD changer (upper module)
DETECTION
CONDITION
Note
•
When error occurs, error message “CHECK CD” is displayed in the LCD.
•
Base unit detects CD reading error.
POSSIBLE
CAUSE
•
Defective CD (scratches or dirt)
•
CD changer (upper module) malfunction
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN CD
CHANGER (UPPER MODULE) OR CD
•
Play all CDs in changer.
•
Is CD changer able to read them properly?
Yes
Go to Step 3.
No
Not able to read particular CD.
Go to next step.
Not able to read any CD.
Go to Step 3.
2
INSPECT CD
•
Inspect condition of CD where error has occurred.
•
Is CD okay?
Note
•
In some cases, not all CD-R/CD-RW will play.
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD,
then go to next step.
3
INSPECT CD CHANGER (UPPER MODULE)
•
Clear DTC.
•
Insert and play CD for 12 seconds or more.
•
Start on-board diagnostic test mode.
•
Is DTC 06:Er07 displayed?
Yes
Replace CD changer (upper module).
No
Troubleshooting completed.
DTC 07:Er01
MD player (lower module)
DETECTION
CONDITION
•
MD player (lower module) cannot perform insert and eject commands.
POSSIBLE
CAUSE
•
Defective MD (broken or foreign material stuck/attached)
•
MD player (lower module) malfunction
STEP
INSPECTION
ACTION
1
•
Is MD able to be ejected?
Yes
Go to next step.
No
Replace MD player (lower module).
2
INSPECT MD
•
Inspect condition of MD where error has occurred.
•
Is MD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace MD, then
go to next step.
3
INSPECT MD PLAYER (LOWER MODULE)
•
Clear DTC.
•
Insert and eject MD with no defect.
•
Start on-board diagnostic test mode.
•
Is DTC 07:Er01 displayed?
Yes
Replace MD player (lower module).
No
Troubleshooting completed.
1712-1U-01G(09-02B).fm 12 ページ 2001年6月29日 金曜日 午前10時27分
ON-BOARD DIAGNOSTIC [AUDIO]
09–02B–13
09–02B
DTC 07:ER02
A3U090266900W24
Diagnostic procedure
End Of Sie
DTC 07:ER07
A3U090266900W25
Diagnostic procedure
End Of Sie
DTC 07:Er02
MD player (lower module)
DETECTION
CONDITION
Note
•
When error occurs, error message “CHECK MD” is displayed in the LCD.
•
Can not play MD normally or change tracks.
POSSIBLE
CAUSE
•
Defective MD (scratches or dirt)
•
MD player (lower module) malfunction
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN MD
PLAYER (LOWER MODULE) OR MD
•
Play MD and select other song (change tracks).
•
Is MD player able to change tracks?
Yes
Go to Step 3.
No
Not able to change
particular tracks.
Go to next step.
Not able to change any
tracks.
Change MD and perform
tracks-change again.
•
If MD player changes
tracks, then go to Step 3.
•
If not, replace MD player
(lower module).
2
INSPECT MD
•
Inspect condition of MD where error has occurred.
•
Is MD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace MD, then
go to next step.
3
INSPECT MD PLAYER (LOWER MODULE)
•
Clear DTC.
•
Play MD and select other song (change tracks).
•
Start on-board diagnostic test mode.
•
Is DTC 07:Er02 displayed?
Yes
Replace MD player (lower module).
No
Troubleshooting completed.
DTC 07:Er07
MD player (lower module)
DETECTION
CONDITION
Note
•
When error occurs, error message “CHECK MD” is displayed in the LCD.
•
Base unit detects MD reading error.
POSSIBLE
CAUSE
•
Defective MD (scratches or dirt)
•
MD player (lower module) malfunction
STEP
INSPECTION
ACTION
1
INSPECT MD
•
Inspect condition of MD where error has occurred.
•
Is MD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace MD, then
go to next step.
2
INSPECT MD PLAYER (LOWER MODULE)
•
Clear DTC.
•
Insert and play MD for 12 seconds or more.
•
Start on-board diagnostic test mode.
•
Is DTC 07:Er07 displayed?
Yes
Replace MD player (lower module).
No
Troubleshooting completed.
1712-1U-01G(09-02B).fm 13 ページ 2001年6月29日 金曜日 午前10時27分
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст