Acura RL (1996-2004 year). Manual — part 678
Front Seat Belt
Removal/Installation (cont'd)
Upper and lower anchor bolt construction:
Seat belt buckle:
).
2. Remove the center cover (see
).
3. Remove the seat belt switch harness from the seat
cushion.
for '99 - 01 models
(with side airbag).
Driver's seat:
Passenger's seat:
Main Menu
Table of Contents
4. Remove the center anchor bolt, then remove the seat
belt buckle.
Center anchor bolt construction:
5. Installation is the reverse of the removal procedure.
NOTE:
• Make sure you assemble the washers on the center
anchor bolt as shown.
• Make sure the seat belt switch harness is fastened
properly.
Main Menu
Table of Contents
Rear Seat Belt
Removal/Installation
CAUTION: Check the rear seat belts for damage, and
replace them if necessary. Be careful not to damage
them during removal and installation.
Rear seat belt:
1. Remove:
• Rear seat cushion and rear seat-back (see
2. Remove all the anchor bolts and retractor bolt,
remove the retractor mounting bolt, then remove
the rear seat belt and retractor.
Main Menu
Table of Contents
Rear Seat Belt
Removal/Installation (cont'd)
3. Installation is the reverse of the removal procedure.
NOTE:
• Check that the retractor locking mechanism func-
• Before installing the anchor bolt, make sure there
are no twists or kinks in the rear seat belt.
Upper anchor bolt construction:
Retractor bolt construction:
Seat belt buckle/Center belt tongue:
1. Remove the rear seat cushion (see
).
2. Remove the center anchor bolts, then remove the
seat belt buckles and center belt tongue.
3. Installation is the reverse of the removal procedure.
NOTE: Before attaching the rear seat-back and rear
seat cushion, make sure there are no twists or kinks
in the center belts.
Center anchor bolt construction:
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст