Acura TSX / Honda Accord CL. Manual — part 98

b. Plastic cover, front door (see COMPONENT LOCATION INDEX ), rear door (see

COMPONENT LOCATION INDEX )

3. Carefully move the glass (A) until you can see the glass mounting bolts (B), then loosen them.

Fig. 65: Loosening Front Door Glass Mounting Bolts

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX

Fig. 66: Loosening Rear Door Glass Mounting Bolts

4. Push the glass (A) against the channel (C), then tighten the glass mounting bolts.

5. Make sure that the glass moves smoothly.

6. Raise the glass fully, and check for gaps. Also check that the glass (A) contacts the glass run channel (B)

evenly.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX

Fig. 67: Checking That The Glass Contacts The Glass Run Channel Evenly

7. Check for water leaks. Run water over the roof and on the sealing area as shown, and note these items:

z

Use a 12 mm (0.47 in.) diameter hose (A).

z

Adjust the rate of water flow as shown (B).

z

Do not use a nozzle.

z

Hold the hose about 300 mm (12 in.) away from the door (C).

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX

Fig. 68: Checking For Water Leaks

8. Attach the plastic cover, and install the door panel, front door (see FRONT DOOR PANEL

REMOVAL/INSTALLATION ), rear door (see REAR DOOR PANEL
REMOVAL/INSTALLATION ).

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX