Acura TSX / Honda Accord CL. Manual — part 604
Fig. 53: Measuring Voltage Between Body Ground & The Appropriate ECM/PCM
Connector Terminals
Fig. 54: DTC/Terminal Identification Table
48. Turn the ignition switch OFF.
49. Remove the intake manifold cover (see step 3 of REMOVAL ).
50. Disconnect the injector 2P connector from the problem cylinder.
51. Turn the ignition switch ON (II).
52. Measure voltage between injector 2P connector terminal No. 1 and body ground.
Is there battery voltage?
YES: Go to step 53.
NO: Repair open in the wire between the injector and the PGM-FI main relay, then go to step
63 .
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 55: Measuring Voltage Between Injector 2P Connector Terminal No. 1 & Body Ground
53. Turn the ignition switch OFF.
54. Check for continuity between body ground and the appropriate ECM/PCM connector terminal (see Fig.
56 and Fig. 57 ).
Is there continuity?
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
YES: Repair short in the wire between the ECM/PCM and the injector, then go to step 63 .
NO: Go to step 55.
Fig. 56: Checking For Continuity Between Body Ground & The Appropriate ECM/PCM
Connector Terminals
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 57: DTC/Terminal Identification Table
55. Connect the appropriate injector 2P connector terminal No. 2 to body ground with a jumper wire (see Fig.
58 and Fig. 59 ).
Fig. 58: Connecting The Appropriate Injector 2P Connector Terminal No. 2 To Body Ground With
A Jumper Wire
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст