Acura TSX / Honda Accord CL. Manual — part 792
Fig. 70: Installing The Idler Gear On The Secondary Shaft, And Installing The Ball Bearing
SECONDARY SHAFT 2ND GEAR CLEARANCE INSPECTION
1. Install the thrust needle bearing (A), needle bearing (B), 2nd gear (C), thrust needle bearing (D), 37 x 58
mm thrust washer (E), and 2nd clutch (F) on the secondary shaft (G), then secure them with the snap ring
(H).
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 71: Exploded View Of Secondary Shaft Components
2. Measure the clearance between the snap ring (A) and the 2nd clutch guide (B) with a feeler gauge (C), in
at least three places. Use the average as the actual clearance.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Standard: 0.04-0.12 mm (0.002-0.005 in.)
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст