Acura CSX. Manual — part 293
−
−
−
−
−
−
−
−
−
−
*01
SNR9AA1E10400013012KBAT00
Exploded View
Point
Distance from Hose End to Clip (L)
Hose End Contact Point
14-253
ATF Cooler Hose Replacement
L
G
H
E
White paint mark
A
Pink paint mark
B
Pink paint mark
C
White paint mark
D
Pink paint mark
F
White paint mark
NOTE: When installing the hose clamps, make sure not to interfere to the surrounding parts.
1. Install the ATF cooler hoses over the ATF cooler lines with the clips at appropriate points in reference to the
following list.
A
6
8 mm (0.24
0.31 in.)
Bulge
B
C
5
7 mm (0.20
0.28 in.)
ATF filter from 10
12 mm (0.40
0.47 in.)
D
E
2
4 mm (0.08
0.16 in.)
White paint line
F
2
4 mm (0.08
0.16 in.)
Bulge
2. Secure the ATF cooler hose with the clamp (G) at the white paint line (H).
3. Refill the transmission with ATF to the proper level (see page 14-232).
08/08/21 14:48:50 61SNR030_140_0255
01
02
03
04
SNR9AA1E10411412282KAAT00
14-254
Automatic Transmission
Shift Lever Removal
A
A
B
C
A
B
1. Remove the center console (see page 20-92).
2. Move the shift lever to R.
3. Pry the socket holder lock (A) up using a
screwdriver.
4. Remove the nut securing the shift cable end.
5. Rotate the socket holder retainer (A)
counterclockwise, push it against the socket holder
bracket (B), then slide the socket holder to remove
the shift cable (C) from the socket holder bracket.
6. Disconnect the shift lock solenoid connector (A)
and the park pin switch/A/T gear position indicator
panel light connector (B).
7. Remove the shift lever assembly.
08/08/21 14:48:51 61SNR030_140_0256
*01
SNR9AA1E10411412282KCAT00
14-255
Shift Lever Installation
B
C
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
A
1. Install the shift lever assembly (A).
2. Connect the shift lock solenoid connector (B) and
the park pin switch/A/T gear position indicator
panel light connector (C).
3. Install the shift cable on the shift lever, and adjust
the cable (see step 5 on page 14-259).
08/08/21 14:48:51 61SNR030_140_0257
*01
SNR9AA1E10411412282MFAT10
14-256
Automatic Transmission
Shift Lever Disassembly/Reassembly
A/T GEAR POSITION
INDICATOR PANEL
SCREWS
3 N·m
(0.3 kgf·m, 2 lbf·ft)
SHIFT LEVER KNOB
SILICONE GREASE
SHIFT LOCK SOLENOID
HARNESS CLAMP
PARK PIN SWITCH/
A/T GEAR POSITION
INDICATOR PANEL
LIGHT CONNECTOR
PARK PIN SWITCH
SHIFT LOCK RELEASE SPRING
SHIFT LOCK
SOLENOID PLUNGER
SHIFT LOCK STOP CUSHION
SHIFT LOCK
STOP
SHIFT LEVER
ASSEMBLY/
BRACKET BASE
SHIFT LEVER
ROD
LEVER COVER
A/T GEAR POSITION
INDICATOR PANEL
LIGHT BLUB
SHIFT LOCK
RELEASE
SHIFT LEVER SHROUD
PLUNGER SPRING
SILICONE
GREASE
SHIFT LOCK
SOLENOID CONNECTOR
BUSHING
SHIFT LEVER ROD CAP
SILICONE GREASE
SILICONE GREASE
NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you
have silicone grease on your hands or gloves.
Replace.
08/08/21 14:48:52 61SNR030_140_0258
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст