Acura CSX. Manual — part 532
01
*01
SNR9AGCJ32127127151MBAT00
’07-08 models
’09 model
22-176
Exterior Lights
Fog Light Adjustment
A
A
Before adjusting the fog lights:
• Park the vehicle on a level surface.
• Make sure the tire pressures are correct.
• The driver or someone who weights the same should
sit in the driver’s seat.
Adjust the fog lights to local requirements by turning
the adjuster (A).
08/08/21 14:27:02 61SNR030_220_0178
05
01
02
SNR9A00J32133114883KBAT00
Headlight
Front Side Marker Light
Headlight (High Beam):
60 W
Headlight (Low Beam) : 51 W
Without HID
High
Low
Front Side Marker Light: 2 CP
22-177
Bulb Replacement
A
A
1. For low beam : Remove the inner fender (see page
20-171).
: Without HID
2. Disconnect the 2P connector (A) from the headlight.
:
3. Turn the bulb socket 45 ° counterclockwise to
remove the bulb.
4. Install a new bulb in the reverse order of removal.
1. Remove the inner fender (see page 20-171).
2. Disconnect the 2P connector (A) from the front side
marker light.
3. Turn the bulb socket 45 ° counterclockwise to
remove the bulb.
4. Install a new bulb in the reverse order of removal.
08/08/21 14:27:03 61SNR030_220_0179
03
04
Front Parking Light
Front Turn Signal Light
Front Parking Light: 3 CP
Front Turn Signal Light: 24/2.2 CP
22-178
Exterior Lights
A
A
1. Disconnect the 2P connector (A) from the front
parking light.
2. Turn the bulb socket 45 ° counterclockwise to
remove the bulb.
3. Install a new bulb in the reverse order of removal.
1. Disconnect the 3P connector (A) from the front turn
signal light.
2. Turn the bulb socket 45 ° counterclockwise to
remove the bulb.
3. Install a new bulb in the reverse order of removal.
08/08/21 14:27:03 61SNR030_220_0180
01
SNR9A00J32173159121KBAT00
02
SNR9A00J32173159121KBAT01
Brake Lights/Taillights:
21/5 W
Rear Turn Signal Light:
21 W
Rear Side Marker Light:
3 CP
Taillight:
5 W
Back-up Light: 16 W
22-179
22-179
Taillight Replacement
Inner Taillight Replacement
A
B
A
B
1. Remove the rear bumper (see page 20-149).
2. Disconnect the connectors (A) from the taillights (B).
3. Turn the bulb sockets 45 ° counterclockwise to
remove the bulbs.
4. Remove the nuts and screws, then remove the
taillight.
5. Install the taillight in the reverse order of removal.
1. Remove the trunk lid trim (see page 20-82).
2. Disconnect the connectors (A) from the inner
taillight (B).
3. Turn the bulb sockets 45 ° counterclockwise to
remove the bulbs.
4. Remove the nuts, then remove the taillight.
5. Install the inner taillight in the reverse order of
removal.
08/08/21 14:27:41 61SNR030_220_0181
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст