Acura CSX. Manual — part 332
01
01
01
01
SNR9A000000000J1701PAAT00
Ref. No.
Tool Number
Description
Qty
17-2
Steering
Special Tools
07AAF-SDAA100
Ball Joint Thread Protector, 12 mm
1
07JAF-SH20330
Bushing Base
1
07MAA-SL0020A
Locknut Wrench, 43 mm
1
07MAC-SL0A202
Ball Joint Remover, 28 mm
1
08/08/21 14:53:10 61SNR030_170_0003
*01
SNR9A00F00000000000DAAT00
17-3
Component Location Index
DRIVER’S AIRBAG
POWER STEERING GEARBOX
STEERING COLUMN
STEERING WHEEL
Replacement,
page 24-188
Rack Guide Adjustment, page 17-15
Tie-rod End Ball Joint Boot Replacement, page 17-16
Gearbox Mount Cushion Replacement, page 17-17
EPS Component, page 17-18
Column Cover Removal and Installation,
page 17-9
Removal and Installation,
page 17-10
Inspection, page 17-14
Steering Lock Replacement,
page 17-14
Removal, page 17-6
Disassembly/ Reassembly,
page 17-7
Installation, page 17-8
08/08/21 14:53:12 61SNR030_170_0004
01
SNR9A00F00000057161MAAT01
01
SNR9A00F00000000000MAAT02
−
−
Rotational play: 0
10 mm (0
0.39 in.)
17-4
17-4
Steering
Steering Wheel Rotational Play
Check
Power Assist Check
1. Turn the front wheels to the straight ahead position.
2. Measure how far you can turn the steering wheel
left and right without moving the front wheels.
• If the play is within the limit, the steering gearbox
and steering linkage are OK.
• If the play exceeds the limit, adjust the rack guide
(see page 17-15). If the play is still excessive after
rack guide adjustment, inspect the steering
linkage and steering gearbox (see page 17-5).
NOTE: This test should be done with original equipment
tires and wheels at the correct tire pressure.
1. Start the engine, and let it idle.
2. Attach a commercially available spring scale to the
steering wheel. With the engine idling and the
vehicle on a clean, dry floor, pull the scale as
shown, and read it as soon as the tires begin to turn.
3. If the scale reads no more than 34 N (3.5 kgf, 7.7 lbf),
the power assist is OK. If it reads more, check these
items:
• Steering linkage (see page 17-5)
• Rack guide adjustment (see page 17-15)
• EPS system (see page 17-19)
08/08/21 14:53:13 61SNR030_170_0005
*01
SNR9A00F00000057131MAAT00
17-5
Steering Linkage and Gearbox Inspection
STEERING COLUMN
STEERING JOINTS
TIE-ROD END BALL JOINT
BALL JOINT BOOT
BOOT
STEERING GEARBOX
GEARBOX MOUNT CUSHIONS
TIE-ROD LOCKNUT
Inspect for loose
mounting hardware.
Check for a loose joint
bolt, or faulty movement.
Inspect for faulty
movement and damage.
Inspect for damage
and deterioration.
Inspect for damage
and deterioration.
Inspect for loose mounting hardware.
Inspect for deterioration.
Inspect for loose locknut.
08/08/21 14:53:13 61SNR030_170_0006
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст