Acura RSX Honda Integra. Manual — part 198
20
21
01
07
13-7
C
A
B
EQS00BRSX0
B
A
C
E
D
EQS00BRSX0
A
11. Remove the engine wire harness cover (A) by
lifting up on the lock tab (B), then slide the harness
forward off the air cleaner housing mounting
bracket (C).
12. Remove the water pipe mounting bolt (A), and
lower the water pipe slighty. Loosen the air cleaner
housing bracket mounting bolt (B), and remove the
mounting bolt (C).
13. Remove the brake booster and evaporative
emission (EVAP) line bracket mounting bolts (D),
and attach the special tool to the threaded hole (E)
in the cylinder head.
14. Install the engine support hanger (A) to the vehicle,
and attach the hook to the special tool.
15. Remove the two transmission upper mounting
bolts.
(cont’d)
05/06/27 18:09:12 61S6M040_130_0007
08
*01
14
2002 model:
2003-2006 models:
13-8
Manual Transmission
Transmission Removal (cont’d)
C
B
A
A
B
C
16. Remove the transmission mount bracket (A) and
the transmission mounting bolt (B).
17. Remove the air cleaner bracket (C).
18. Raise the vehicle, and make sure it is securely
supported.
19. Drain the transmission fluid. Reinstall the drain
plug using a new drain plug washer (see page 13-4).
20. Remove the splash shield.
21. Remove the three way catalytic converter (TWC)
assembly (see step 29 on page 5-6).
22. Remove the driveshafts (see page 16-4).
23. Remove the intermediate shaft (see page 16-19).
05/06/27 18:09:13 61S6M040_130_0008
10
*02
02
*03
13-9
Other models
2005-2006
6-speed models
EQS02C000011
C
C
A
B
A
24. Remove the front engine mount bracket mounting
bolt.
25. Remove the three bolts securing the transmission
rear mount.
26. Support the front suspension subframe with the
subframe adapter and a jack.
27. Make reference marks (A) on the front suspension
subframe (B) and mounting bolts (C), then remove
the front suspension subframe.
(cont’d)
05/06/27 18:09:14 61S6M040_130_0009
14
15
16
03
17
03
5-speed model:
6-speed model:
5-speed model: Four lower bolts
6-speed model: Two rear and two lower bolts
13-10
Manual Transmission
Transmission Removal (cont’d)
A
B
28. Remove the clutch cover.
29. Remove the front engine mount.
30. Place the transmission jack under the transmission,
and remove the transmission mounting bolts.
31. 6-speed model: Remove the harness bracket (A),
then remove the intake manifold bracket (B).
05/06/27 18:09:14 61S6M040_130_0010
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст