Acura RSX Honda Integra. Manual — part 199
19
04
05
13-11
B
A
C
D
B
A
E
32. 6-speed model: Remove the two front transmission
mounting bolts.
33. Pull the transmission away from the engine until
the transmission mainshaft clears the clutch
pressure plate, then lower the transmission on the
transmission jack.
34. Remove the transmission rear mount (A) and the
transmission rear mount bracket (B).
35. Remove the release fork boot (A) from the clutch
housing (B).
36. Remove the release fork (C) from the clutch
housing by squeezing the release fork set spring (D)
with pliers. Remove the release bearing (E).
05/06/27 18:09:15 61S6M040_130_0011
*01
*02
01
02
S6M6A01E34150100000KCAT00
−
−
−
−
−
−
Special Tools Required
13-12
Manual Transmission
Transmission Installation
B
0.4
1.0 g
(0.01
0.04 oz)
1.0
0.6 g
(0.04
0.06 oz)
A
C
0.4
1.0 g (0.01
0.04 oz)
12 x 1.25 mm
64 N·m (6.5 kgf·m,
47 lbf·ft)
12 x 1.25 mm
64 N·m (6.5 kgf·m,
47 lbf·ft)
B
A
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
8 x 1.25 mm
22 N·m (2.2 kgf·m, 16 lbf·ft)
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 9 lbf·ft)
A
B
• Engine hanger adapter EQS00BRSX0
• Engine support hanger, A & Reds AAR-T-12566
• Subframe adapter EQS02C000011
Available through the Honda Tool and Equipment
Program 1-888-424-6857.
1. Make sure the two dowel pins are installed in the
clutch housing.
2. Apply super high temp urea grease (P/N 08798-
9002) to the release fork (A) and the release bearing
(B). Install the release fork, the release bearing, and
the boot (C).
3. Install the transmission rear mount bracket (A) and
the transmission rear mount (B).
4. Place the transmission on the transmission jack,
and raise it to the engine level.
5. 6-speed model: Install the two front transmission
mounting bolts.
6. 6-speed model: Install the intake manifold bracket
(A), then install the harness bracket (B).
Replace.
Replace.
05/06/27 18:09:16 61S6M040_130_0012
03
03
*03
05
06
5-speed model: Four lower bolts
6-speed model: Two rear and two lower bolts
5-speed model:
6-speed model:
13-13
12 x 1.25 mm
64 N·m (6.5 kgf·m, 47 lbf·ft)
12 x 1.25 mm
64 N·m (6.5 kgf·m, 47 lbf·ft)
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
10 x 1.25 mm
44 N·m
(4.5 kgf·m, 33 lbf·ft)
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
6 x 1.0 mm
12 N·m (1.2 kgf·m, 9 lbf·ft)
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 9 lbf·ft)
7. Install the transmission mounting bolts.
8. Install the front engine mount.
9. Install the clutch cover.
(cont’d)
Replace.
Replace.
05/06/27 18:09:17 61S6M040_130_0013
04
*09
*04
07
13-14
Manual Transmission
Transmission Installation (cont’d)
EQS02C000011
B
A
14 x 1.5 mm
103 N·m
(10.5 kgf·m,
76 lbf·ft)
14 x 1.5 mm
103 N·m
(10.5 kgf·m,
76 lbf·ft)
B
Other models
2005-2006
6-speed models
10 x 1.25 mm
59 N·m (6.0 kgf·m,
43 lbf·ft)
10 x 1.25 mm
59 N·m (6.0 kgf·m,
43 lbf·ft)
12 x 1.25 mm
64 N·m (6.5 kgf·m, 47 lbf·ft)
10. Support the front suspension subframe with the
subframe adapter and a jack.
11. Install the front suspension subframe (A) in its
original position by aligning it with the marks (B)
you made in the removal procedure.
12. Install the three rear mounting bolts for the
transmission rear mount.
13. Install the front engine mount bracket mounting
bolt.
Replace.
Replace.
Replace.
Replace.
Replace.
05/06/27 18:09:18 61S6M040_130_0014
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст