Acura RSX Honda Integra. Manual — part 245
−
*01
*02
*03
S6M6APJK77100090753FAAT00
−
−
−
−
−
−
DTC P0753:
2002-2004 Models
YES
NO
YES
NO
YES
NO
14-105
LG1 (BRN/YEL)
SH A (BLU/BLK)
A (31P)
C (22P)
PCM CONNECTORS
LG1 (BRN/YEL)
SH A (BLU/BLK)
A (31P)
C (22P)
PCM CONNECTORS
LG1 (BRN/YEL)
SH A (BLU/BLK)
A (31P)
C (22P)
PCM CONNECTORS
Problem in Shift Solenoid Valve
A Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-3) before
you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Turn the ignition switch OFF.
2. Disconnect PCM connectors A (31P) and C (22P).
3. Turn the ignition switch ON (II).
4. Measure the voltage between PCM connector
terminals C6 and A24.
Repair short to power in the wire between
PCM connector terminal C6 and the shift solenoid
valve A.
Go to step 5.
5. Turn the ignition switch OFF.
6. Disconnect the shift solenoid harness connector at
the transmission housing.
7. Check for continuity between PCM connector
terminals C6 and A24.
Repair short to ground in the wire between
PCM connector terminal C6 and the shift solenoid
harness.
Go to step 8.
8. Connect the shift solenoid harness connector.
9. Measure the resistance between PCM connector
terminals C6 and A24.
Update the PCM if it does not have the latest
software, or substitute a known-good PCM
(see page 14-7), then recheck. If the symptom/
indication goes away with a known-good PCM,
replace the original PCM.
Go to step 10.
(cont’d)
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is ther e voltage?
Is ther e continuity?
Is ther e 12
25
?
05/06/27 17:50:05 61S6M040_140_0106
04
−
−
YES
NO
14-106
Automatic Transmission
DTC Troubleshooting (cont’d)
PCM CONNECTOR C (22P)
SH A (BLU/BLK)
SHIFT SOLENOID
HARNESS
CONNECTOR
SH A (BLU/BLK)
10. Disconnect the shift solenoid harness connector.
11. Check for continuity between PCM connector
terminal C6 and shift solenoid harness connector
terminal No. 5.
Check the shift solenoid valve A, and check
for an open in the shift solenoid harness in the
transmission (see page 14-258).
Repair open in the wire between PCM
connector terminal C6 and the shift solenoid
harness.
Wire side of female terminals
Is ther e continuity?
05/06/27 17:50:05 61S6M040_140_0107
−
*01
*02
*03
S6M6APJK77100090758FAAT00
−
−
−
−
−
−
DTC P0758:
2002-2004 Models
YES
NO
YES
NO
YES
NO
14-107
LG1 (BRN/YEL)
SH B (GRN/WHT)
A (31P)
C (22P)
PCM CONNECTORS
LG1 (BRN/YEL)
SH B (GRN/WHT)
A (31P)
C (22P)
PCM CONNECTORS
LG1 (BRN/YEL)
SH B (GRN/WHT)
A (31P)
C (22P)
PCM CONNECTORS
Problem in Shift Solenoid Valve
B Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-3) before
you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Turn the ignition switch OFF.
2. Disconnect PCM connectors A (31P) and C (22P).
3. Turn the ignition switch ON (II).
4. Measure the voltage between PCM connector
terminals C4 and A24.
Repair short to power in the wire between
PCM connector terminal C4 and the shift solenoid
valve B.
Go to step 5.
5. Turn the ignition switch OFF.
6. Disconnect the shift solenoid harness connector at
the transmission housing.
7. Check for continuity between PCM connector
terminals C4 and A24.
Repair short to ground in the wire between
PCM connector terminal C4 and the shift solenoid
harness.
Go to step 8.
8. Connect the shift solenoid harness connector.
9. Measure the resistance between PCM connector
terminals C4 and A24.
Update the PCM if it does not have the latest
software, or substitute a known-good PCM
(see page 14-7), then recheck. If the symptom/
indication goes away with a known-good PCM,
replace the original PCM.
Go to step 10.
(cont’d)
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is ther e voltage?
Is ther e continuity?
Is ther e 12
25
?
05/06/27 17:50:06 61S6M040_140_0108
04
−
−
YES
NO
14-108
Automatic Transmission
DTC Troubleshooting (cont’d)
PCM CONNECTOR C (22P)
SH B
(GRN/WHT)
SHIFT SOLENOID
HARNESS
CONNECTOR
SH B
(GRN/WHT)
10. Disconnect the shift solenoid harness connector.
11. Check for continuity between PCM connector
terminal C4 and shift solenoid harness connector
terminal No. 2.
Check shift solenoid valve B, and check for
an open in the shift solenoid harness in the
transmission (see page 14-258).
Repair open in the wire between PCM
connector terminal C4 and the shift solenoid
harness.
Wire side of female terminals
Is ther e continuity?
05/06/27 17:50:06 61S6M040_140_0109
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст