Acura RSX Honda Integra. Manual — part 246
−
*01
*02
*03
S6M6APJK77100090763FAAT00
−
−
−
−
−
−
DTC P0763:
2002-2004 Models
YES
NO
YES
NO
YES
NO
14-109
LG1 (BRN/YEL)
SH C (GRN)
A (31P)
C (22P)
PCM CONNECTORS
LG1 (BRN/YEL)
SH C (GRN)
A (31P)
C (22P)
PCM CONNECTORS
LG1 (BRN/YEL)
SH C (GRN)
A (31P)
C (22P)
PCM CONNECTORS
Problem in Shift Solenoid Valve
C Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-3) before
you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Turn the ignition switch OFF.
2. Disconnect PCM connectors A (31P) and C (22P).
3. Turn the ignition switch ON (II).
4. Measure the voltage between PCM connector
terminals C2 and A24.
Repair short to power in the wire between
PCM connector terminal C2 and the shift solenoid
valve C.
Go to step 5.
5. Turn the ignition switch OFF.
6. Disconnect the shift solenoid harness connector at
the transmission housing.
7. Check for continuity between PCM connector
terminals C2 and A24.
Repair short to ground in the wire between
PCM connector terminal C2 and the shift solenoid
harness.
Go to step 8.
8. Connect the shift solenoid harness connector.
9. Measure the resistance between PCM connector
terminals C2 and A24.
Update the PCM if it does not have the latest
software, or substitute a known-good PCM
(see page 14-7), then recheck. If the symptom/
indication goes away with a known-good PCM,
replace the original PCM.
Go to step 10.
(cont’d)
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is ther e voltage?
Is ther e continuity?
Is ther e 12
25
?
05/06/27 17:50:06 61S6M040_140_0110
04
−
−
YES
NO
14-110
Automatic Transmission
DTC Troubleshooting (cont’d)
PCM CONNECTOR C (22P)
SHIFT SOLENOID
HARNESS
CONNECTOR
SH C (GRN)
SH C (GRN)
10. Disconnect the shift solenoid harness connector.
11. Check for continuity between PCM connector
terminal C2 and shift solenoid harness connector
terminal No. 1.
Check the shift solenoid valve C, and check
for an open in the shift solenoid harness in the
transmission (see page 14-258).
Repair open in the wire between PCM
connector terminal C2 and the shift solenoid
harness.
Wire side of female terminals
Is ther e continuity?
05/06/27 17:50:06 61S6M040_140_0111
−
*01
*02
*03
S6M6APJK77100090768FAAT00
−
−
−
−
−
−
DTC P0768:
2002-2004 Models
YES
NO
YES
NO
YES
NO
14-111
LG1 (BRN/YEL)
SH D (GRN/RED)
A (31P)
C (22P)
PCM CONNECTORS
LG1 (BRN/YEL)
SH D (GRN/RED)
A (31P)
C (22P)
PCM CONNECTORS
LG1 (BRN/YEL)
SH D (GRN/RED)
A (31P)
C (22P)
PCM CONNECTORS
Problem in Shift Solenoid Valve
D Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-3) before
you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Turn the ignition switch OFF.
2. Disconnect PCM connectors A (31P) and C (22P).
3. Turn the ignition switch ON (II).
4. Measure the voltage between PCM connector
terminals C5 and A24.
Repair short to power in the wire between
PCM connector terminal C5 and the shift solenoid
valve D.
Go to step 5.
5. Turn the ignition switch OFF.
6. Disconnect the shift solenoid harness connector at
the transmission housing.
7. Check for continuity between PCM connector
terminals C5 and A24.
Repair short to ground in the wire between
PCM connector terminal C5 and the shift solenoid
harness.
Go to step 8.
8. Connect the shift solenoid harness connector.
9. Measure the resistance between PCM connector
terminals C5 and A23 or A24.
Update the PCM if it does not have the latest
software, or substitute a known-good PCM
(see page 14-7), then recheck. If the symptom/
indication goes away with a known-good PCM,
replace the original PCM.
Go to step 10.
(cont’d)
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is ther e voltage?
Is ther e continuity?
Is ther e 12
25
?
05/06/27 17:50:07 61S6M040_140_0112
01
−
−
YES
NO
14-112
Automatic Transmission
DTC Troubleshooting (cont’d)
PCM CONNECTOR C (22P)
SHIFT SOLENOID
HARNESS
CONNECTOR
SH D (GRN/RED)
SH D (GRN/RED)
10. Disconnect the shift solenoid harness connector.
11. Check for continuity between PCM connector
terminal C5 and shift solenoid harness connector
terminal No. 8.
Check the shift solenoid valve D, and check
for an open in the shift solenoid harness in the
transmission (see page 14-258).
Repair open in the wire between PCM
connector terminal C5 and the shift solenoid
harness.
Wire side of female terminals
Is ther e continuity?
05/06/27 17:50:07 61S6M040_140_0113
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст