Acura RSX Honda Integra. Manual — part 384
06
07
20-73
A
B
C
B
A
: Screw, 9
B
5 x 0.8 mm
5 N·m
(0.5 kgf·m,
4 lbf·ft)
A
B
D
A
Fastener Locations
: Bolt, 6
B
B
B
B
B
E
A
A
A
A
B
C
B
B
8. Detach the harness holder (A), and remove the
cushion tape (B) for the sunlight sensor harness (C).
9. Remove the bolts (A) and screws (B) securing the
dashboard (C) and steering hanger beam (D), and
separate the dashboard and steering hanger beam.
10. Reassemble the dashboard and steering hanger
beam in the reverse order of disassembly, and note
these items:
• Make sure the dashboard wire harness (E) is not
pinched.
• Make sure the connectors are plugged in
properly.
05/06/27 18:23:54 61S6M040_200_0074
*01
S6M6A00J46100000000DAAT10
20-74
Seats
Component Location Index
REAR SEAT
FRONT SEAT
(Driver’s)
FRONT SEAT
(Passenger’s)
Removal/Installation, page 20-85
Seat-back Pivot Bracket Replacement,
page 20-86
Seat-back Striker Replacement,
page 20-86
Seat-back Latch Replacement,
page 20-87
Seat-back Cover Replacement,
page 20-87
Seat Cushion Cover Replacement,
page 20-89
Removal/Installation, page 20-75
Disassembly/Reassembly-Driver’s, page 20-77
Lumbar Support Replacement, page 20-83
Seat Cover Replacement, page 20-79
Removal/Installation, page 20-75
Disassembly/Reassembly-Passenger’s, page 20-78
Seat Cover Replacement, page 20-79
05/06/27 18:23:57 61S6M040_200_0075
01
02
*01
S6M6A00J46127053913KDAT00
Special Tools Required
Outer
Inner
20-75
Front Seat Removal/Installation
A
A
Fastener Locations
: Bolt, 4
’02 model
’03-06 models
10 x 1.25 mm
A
KTC trim tool set SOJATP2014
SRS components are located in this area. Review the
SRS component locations (see page 23-10) and the
precautions and procedures (see page 23-11) before
performing repairs or service.
NOTE:
• Use the appropriate tool from the KTC trim tool set to
avoid damage when prying components.
• Take care not to scratch the body or tear the seat
covers.
• Put on gloves to protect your hands.
1. Make sure you have the anti-theft code for the radio,
then write down the frequencies for the preset
buttons.
2. Disconnect the negative cable from the battery, and
wait at least 3 minutes before beginning work.
3. Remove the seat track end covers (A) from the back
of both seat tracks.
4. Remove the bolts securing the front seat (A).
(cont’d)
05/06/27 18:23:57 61S6M040_200_0076
04
02
*02
Passenger’s seat
Passenger’s seat with BOSE sound system
20-76
Seats
Front Seat Removal/Installation (cont’d)
A
C
B
A
F
E
D
Fastener Locations
: Nut, 2
A
G
H
J
A
I
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
Fastener Locations
: Bolt, 4
’02 model
’03-06 models
10 x 1.25 mm
34 N·m
(3.5 kgf·m, 25 lbf·ft)
5. Lift up the front seat, then detach the harness clips
(A), and disconnect the seat belt switch connector
(B), seat belt buckle tensioner connector (C), and
side airbag connector (D), and on the passenger’s
seat, disconnect the OPDS unit connector (E). If
equipped, disconnect the seat heater connector (F).
If equipped with BOSE sound system, remove the
nuts, then remove the front stereo amplifier (G)
from the seat cushion, and disconnect the
subharness connector (H), seat belt buckle
tensioner connector (I), and side airbag connector
(J). The passenger’s seat is shown, the driver’s seat
is similar except it has no OPDS unit connector.
6. With the help of an assistant, carefully remove the
front seat through the door opening.
7. Install the seat in the reverse order of removal, and
note these items:
• Make sure each connector is plugged in properly.
• Apply liquid thread lock to the seat mounting
bolts before reinstallation.
• Tighten the seat mounting bolts to the specified
torque in the sequence shown. Slide the seat all
the way back and tighten
and
, then slide it
forward and tighten
and
.
• Reconnect the negative cable to the battery.
• Enter the anti-theft code for the radio, then enter
the customer’s radio station presets.
• Reset the clock.
• ’02-04 models: Do the ECM/PCM idle learn
procedure (see page 11-349).
• Do the power window control unit reset
procedure (see page 22-148).
05/06/27 18:23:58 61S6M040_200_0077
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст