DAF 95XF. Manual — part 618
8
LEADING REAR AXLE 09N044 (FTP-TYPE VEHICLES)
Contents
95XF series
2
7
200424
8
95XF series
General
LEADING REAR AXLE 09N044 (FTP-TYPE VEHICLES)
1-1
1. GENERAL
1.1 DESCRIPTION OF 09N044 LEADING REAR AXLE
The 09N044 leading rear axle is a rigid axle.
The axle is equipped with air suspension and if
the vehicle load admits it, the axle can be raised
pneumatically.
The wheel hub has separate wheel bearings
that are greased. The wheel bearing play is
adjusted using the hub nut, which is secured by
a split pin.
1.2 OVERVIEW DRAWING, 09N044 LEADING REAR AXLE
1
2
4
5
6
7
8
9
10
3
S7 00 640
1.
Hub cap
2.
Split pin
3.
Hub nut
4.
Bearing cage
5.
Outer race
6.
Wheel hub
7.
Brake drum
8.
Outer race
9.
Bearing cage
10. Hub oil seal
7
200424
8
LEADING REAR AXLE 09N044 (FTP-TYPE VEHICLES)
General
95XF series
1-2
7
200424
8
95XF series
Inspection and adjustment
LEADING REAR AXLE 09N044 (FTP-TYPE VEHICLES)
2-1
2. INSPECTION AND ADJUSTMENT
2.1 INSPECTION AND ADJUSTMENT, WHEEL BEARING PLAY OF LEADING
REAR AXLE 09N044 (FTP-TYPE VEHICLES)
Checking the wheel bearing play
1. Remove the hub cap using special tool
(DAF no. 1329498).
2. Lift the leading rear axle and support it
properly.
3. Release the brakes.
4. Fit a dial gauge and let the stylus rest
against the axle journal.
5. Push and pull on the wheel. Read the value
off the gauge. Compare this reading to the
specified value, see “Technical data”. If the
reading falls outside the tolerance range,
the wheel bearing play should be
re-adjusted.
6. Fit the hub cap. Tighten the hub cap to the
specified torque using the special tool
(DAF no. 1329498). See “Technical data”.
7. Adjust the brakes.
S7 00 635
Adjusting the wheel bearing play
1. Remove the hub cap (4) using special tool
(DAF no. 1329498).
2. Lift the leading rear axle.
3. Release the brakes.
4. Remove the split pin (3) from the hub
nut (2).
5. Tighten the lock nut to the specified
tightening torque, see “Technical data”. Turn
the wheel at least 5 revolutions
anti-clockwise and then 5 revolutions
clockwise while fixing the hub nut.
6. Check that the wheel rotates smoothly.
S7 00 657
1
2
3
4
200424
7
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст