DAF LF45, LF55 Series. Manual — part 475
©
200436
3-51
Removal and installation
BRAKE SYSTEM AND COMPONENTS
ΛΦ45/55 series
6
4
3.26 REMOVAL AND INSTALLATION, BRAKE-CHAMBER DIAPHRAGM
Removal of the brake chamber
1.
Clean the spring brake cylinder.
2.
Apply pressure to connection point 12
(min. 6.0 bar).
3.
Slacken the release bolt (1) of the spring
brake cylinder as much as possible.
4.
Remove the clamping strap.
5.
Remove the spring brake section (2) from
the brake cylinder.
6.
Remove the diaphragm (3).
Installation of the brake chamber
1.
Apply pressure to connection point 12
(min. 6.0 bar).
2.
Fit the diaphragm (3).
3.
Place the complete spring brake section (2)
on the brake cylinder and fit the clamping
strip, tightening it to the specified torque. See
"Technical data".
4.
Screw the release bolt (1) in as far as
possible.
3
2
1
R600787
BRAKE SYSTEM AND COMPONENTS
3-52
©
200436
Removal and installation
4
ΛΦ45/55 series
6
©
200436
1
Contents
BRAKING PERFORMANCE AND BRAKE EQUALISATION
ΛΦ45/55 series
6
5
5 Braking performance and brake equalisation
CONTENTS
Page
Date
What is a vehicle combination with a good braking performance? . . . . . . 1-2 . . . . . 200436
Brake equalisation measurement by means of brake dynamometer. . . . . 1-4 . . . . . 200436
BRAKING PERFORMANCE AND BRAKE EQUALISATION
2
©
200436
Contents
5
ΛΦ45/55 series
6
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст