DAF CF65, CF75, CF85 Series . Manual — part 225
©
200324
4-15
Removal and installation
PE ENGINE
CF65/75/85 series
2
5
4.11 REMOVAL AND INSTALLATION, STARTER MOTOR
Removing the starter motor
1.
Disconnect the earth lead from the battery
terminal.
2.
Disconnect the contacts of the starter motor.
3.
Remove the noise insulation cover if fitted.
4.
Remove the starter motor. Check the starter
pinion for damage.
Installing the starter motor
1.
Clean the contact surfaces of the starter
motor and the flywheel housing.
2.
Fit the starter motor and tighten the
attachment nuts to the specified torque. See
"Technical data".
3.
Connect the starter motor.
4.
Check the operation of the starter motor.
5.
Fit the noise insulation cover.
6.
Fit the earth cable.
PE ENGINE
4-16
©
200324
Removal and installation
5
CF65/75/85 series
2
4.12 REMOVAL AND INSTALLATION, AIR-CONDITIONING COMPRESSOR
V-BELT
Removing the air-conditioning compressor
V-belt
1.
Slacken the central bolt (1) of the tensioner.
2.
Unscrew the adjusting bolt (2) until the V-belt
can be removed from the pulley.
Fitting the air-conditioning compressor V-belt
1.
Inspect the pulley discs for damage, rust and
greasy deposits.
2.
Fit the new air-conditioning compressor
V-belt and adjust the V-belt tension. See
"Inspection and adjustment".
1
2
M200885
©
200324
4-17
Removal and installation
PE ENGINE
CF65/75/85 series
2
5
4.13 REMOVAL AND INSTALLATION, POLY-V-BELT
Removing the poly-V-belt
1.
Remove the locking screw from the wind
tunnel collar (G) and turn the latter towards
the radiator.
2.
If fitted, remove the air-conditioning
compressor V-belt.
3.
Move the tensioner against the spring force
and lock it with a 4 to 5 mm thick pin (bore).
4.
Take the poly-V-belt off over the fan.
5.
Inspect the automatic tensioner. See
"Inspection and adjustment".
Installing the poly-V-belt
1.
Inspect the belt pulleys for damage, rust and
grease deposits.
2.
Pull the poly-V-belt over the fan.
3.
Move the tensioner against the spring
tension so that the locking pin can be
removed. Tension the tensioner against the
belt.
4.
Fit the new air-conditioning compressor V-
belt and adjust the V-belt tension. See
"Inspection and adjustment".
M201032
H
J
G
F
M201275
PE ENGINE
4-18
©
200324
Removal and installation
5
CF65/75/85 series
2
5.
Turn the wind tunnel collar towards the
engine and fit the locking screw.
M201032
H
J
G
F
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст