DAF CF65, CF75, CF85 Series . Manual — part 172
©
200351
1-7
CE engine
TECHNICAL DATA
ΧΦ65/75/85 series
2
0
Vibration damper
Timing gear
Attachment bolts, cap, front of engine
(1) Tighten the attachment bolts in the order indicated
Flywheel
Flywheel housing
(1) Tighten the attachment bolts in the order indicated
Engine mounts, front
Attachment bolts
50 Nm + 90
angular displacement
Camshaft locking plate attachment bolts
24 Nm
M8 attachment bolts for timing gear case
24 Nm
M10 attachment bolts for timing gear case
47 Nm
M12 attachment bolts for timing gear case
50 Nm
Fit timing gear case using sealant
Loctite Ultra Grey
Attachment bolts, camshaft gear
36 Nm
M201144
1
12
9
6
3
8
5
2
4
7
11
10
13
Attachment bolts,
cap, front of
engine
24 Nm
Fit cap at engine
front using sealant
Loctite Ultra Grey
Attachment bolts
30 Nm + 60
angular displacement
M201080
20
7
11
1
14
19
17
15
13
10
18
12
16
6
4
9
3
5
8
2
M10 attachment
bolts
49 Nm
M12 attachment
bolts
85 Nm
Fit flywheel housing
using sealant
Loctite 5205
Engine bracket attachment bolts/nuts
110 Nm
TECHNICAL DATA
1-8
©
200351
CE engine
0
ΧΦ65/75/85 series
2
Engine mounts, rear
Engine hanger brackets
Bolts attaching engine bracket to chassis
110 Nm + 90
angular displacement
Bolts attaching engine bracket to engine
110 Nm + 60
angular displacement
Bolts attaching support to engine bracket
170 Nm + 90
angular displacement
Attachment bolts
113 Nm
©
200351
2-1
CE-engine cooling system
TECHNICAL DATA
ΧΦ65/75/85 series
2
0
2. CE-ENGINE COOLING SYSTEM
2.1 GENERAL
Thermostat
Header tank pressure cap
Pressure-testing the cooling system
Thermostat opening temperatures:
Thermostat opens at
approx. 81
C
Thermostat fully open at
approx. 94
C
Full thermostat opening
14.3 mm
Pressure relief valve opening pressure
1 - 1.2 bar
Underpressure valve opening pressure
0.1 - 0.02 bar
Closed pressure cap position
Brand name (2) legible horizontally or 60
before
this position.
1
2
M201272
Closed pressure cap
position
Brand name (2)
legible horizontally or
60
before this
position.
Test pressure
0.5 - 0.7 bar
TECHNICAL DATA
2-2
©
200351
CE-engine cooling system
0
ΧΦ65/75/85 series
2
2.2 TIGHTENING TORQUES
The tightening torques specified in this section
are different from the standard tightening torques
cited in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque cited in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Coolant pump
Thermostat housing
Radiator
Attachment bolts
24 Nm
Attachment bolts
10 Nm
Attachment nuts
60 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст