Honda Odyssey 2004. Manual — part 136
−
−
−
−
*01
*02
S0X4A00A20336359411MBAT00
11-242
Intake Air System
Throttle Cable Adjustment
B
A
A
B
C
1. Hold the throttle link (A) to the throttle lever (B).
There should be no clearance.
2. Check cable free play at the throttle linkage. Cable
free play (A) should be 10
12 mm (3/8
1/2 in.).
3. If free play is not within specs (10
12 mm, 3/8
1/2
in.), loosen the locknut (B), turn the adjusting nut
(C) until the free play is as specified, then retighten
the locknut.
4. With the cable properly adjusted, check the throttle
valve to be sure it opens fully when you push the
accelerator pedal to the floor. Also check the
throttle valve to be sure it returns to the idle
position whenever you release the accelerator
pedal.
03/07/29 09:24:43 61S0X050_110_0242
01
02
S0X4A00A20336359401KDAT00
’99-00 models
’01 model
11-243
Throttle Body Removal/Installation
SPACER
MAP SENSOR
THROTTLE CABLE
22 N·m (2.2 kgf ·m, 16 lbf·ft)
TP SENSOR
GASKET
GASKET
CRUISE CONTROL CABLE
GASKET
MAP SENSOR
THROTTLE CABLE
CRUISE
CONTROL CABLE
22 N·m
(2.2 kgf·m, 16 lbf·ft)
TP SENSOR
SPACER
NOTE:
• Do not adjust the throttle stop screw.
• After reassembly, adjust the cruise control cable (see page 4-52), and the throttle cable (see page 11-242).
• The TP sensor is not removable.
(cont’d)
Replace.
Replace.
Replace.
03/07/29 09:24:44 61S0X050_110_0243
03
’02-04 models
11-244
Intake Air System
Throttle Body Removal/Installation (cont’d)
GASKET
MAP SENSOR
THROTTLE CABLE
CRUISE
CONTROL CABLE
22 N·m
(2.2 kgf·m, 16 lbf·ft)
TP SENSOR
SPACER
Replace.
03/07/29 09:24:44 61S0X050_110_0244
03
04
01
*01
S0X4A00A20336359401MFAT00
’99 model
’00 model
’01 model
’02-04 models
11-245
Throttle Body Disassembly/Reassembly
2.1 N·m (0.21 kgf·m, 1.5 lbf·ft)
MAP SENSOR
IDLE ADJUSTING
SCREW
O-RING
IAC VALVE
3.5 N·m (0.35 kgf·m, 2.5 lbf·ft)
O-RING
TP SENSOR
O-RING
2.1 N·m (0.21 kgf·m, 1.5 lbf·ft)
MAP SENSOR
IDLE ADJUSTING
SCREW
O-RING
IAC VALVE
3.5 N·m (0.35 kgf·m, 2.5 lbf·ft)
O-RING
TP SENSOR
O-RING
SPACER
2.1 N·m
(0.21 kgf·m, 1.5 lbf·ft)
MAP SENSOR
O-RING
O-RING
IDLE ADJUSTING SCREW
IAC VALVE
O-RING
TP SENSOR
3.5 N·m
(0.35 kgf·m, 2.5 lbf·ft)
2.1 N·m
(0.21 kgf·m, 1.5 lbf·ft)
MAP SENSOR
O-RING
SPACER
O-RING
IDLE ADJUSTING SCREW
IAC VALVE
O-RING
TP SENSOR
3.5 N·m
(0.35 kgf·m, 2.5 lbf·ft)
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
03/07/29 09:24:46 61S0X050_110_0245
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст