Honda Odyssey 2004. Manual — part 488
01
02
03
04
[
]
[ ]
[
]
Left Sliding Door
Right Sliding Door
22-280
Power Door Locks/Factory Keyless/Factory Security
Door Lock Actuator Test (cont’d)
A
A
Terminal
Position
LOCK
UNLOCK
D2
D1
:With Security
D3
D2
Terminal
Position
LOCK
UNLOCK
E1
E2
1. Remove the left sliding door panel (see page 20-13).
2. Disconnect the connector (A) from the actuator.
3. Check actuator operation by connecting power and
ground according to the table. To prevent damage
to the actuator, apply battery voltage only
momentarily.
4. If the actuator does not work as specified, replace it.
1. Remove the right sliding door panel (see page 20-
13).
2. Disconnect the connector (A) from the actuator.
3. Check actuator operation by connecting power and
ground according to the table. To prevent damage
to the actuator, apply battery voltage only
momentarily.
4. If the actuator does not work as specified, replace it.
With Security:
Without Security:
Termimal side of
male terminals
With Security:
Without Security:
Terminal side of
male terminals
03/07/29 10:25:56 61S0X050_220_0282
01
02
S0X4A00J46660521011FEAT80
Driver’s Door
Passenger’s Door (With Security System)
22-281
Door Lock Knob Switch Test
B
A
A
B
1. Remove the driver’s door panel (see page 20-7).
2. Disconnect the 3P connector (A) from the actuator
(B).
3. Check for continuity between the No. 1 and No. 2
terminals in each switch position.
• There should be continuity with the knob switch
in LOCK.
• There should be no continuity with the knob
switch in UNLOCK.
4. Check for continuity between the No. 2 and No. 3
terminals in each switch position.
• There should be continuity with the knob switch
in UNLOCK.
• There should be no continuity with the knob
switch in LOCK.
5. If the continuity is not as specified, replace the
switch.
1. Remove the front passenger’s door panel (see page
20-7).
2. Disconnect the 3P connector (A) from the actuator
(B).
3. Check for continuity between the No. 1 and No. 2
terminals in each switch position.
• There should be continuity with the knob switch
in UNLOCK.
• There should be no continuity with the knob
switch in LOCK.
4. If the continuity is not as specified, replace the
switch.
(cont’d)
03/07/29 10:25:57 61S0X050_220_0283
03
*01
05
[
]
[
]
[
]
[ ]
Left Sliding Door
Right Sliding Door (With Security System)
22-282
Power Door Locks/Factory Keyless/Factory Security
Door Lock Knob Switch Test (cont’d)
A
Terminal
Position
LOCK
UNLOCK
D1
D5
D6
D4
D3
: With Security
A
1. Remove the left sliding door panel (see page 20-13).
2. Disconnect the connector (A) from the actuator.
3. Check for continuity between the terminals in each
switch position according to the table.
4. If the continuity is not as specified, replace the
switch.
1. Remove the right sliding door panel (see page 20-
13).
2. Disconnect the connector (A) from the actuator.
3. Check for continuity between the E3 and E4
terminals in each switch position.
• There should be continuity with the knob switch
in UNLOCK.
• There should be no continuity with the knob
switch in LOCK.
4. If the continuity is not as specified, replace the
switch.
Without Security:
With Security:
Terminal side of
male terminals
Terminal side of
male terminals
03/07/29 10:25:57 61S0X050_220_0284
01
02
03
13
04
S0X4A00J46660520702FEAT35
Driver’s Door
Passenger’s Door
With Security:
Without Security:
22-283
Door/Tailgate Key Cylinder Switch Test
B
A
Terminal
Position
OFF
1
2
UNLOCK
3
LOCK
Terminal
Position
OFF
1
2
UNLOCK
A
B
Terminal
Position
OFF
1
2
UNLOCK
3
LOCK
1. Remove the driver’s door panel (see page 20-7).
2. Disconnect the 3P connector (A) from the key
cylinder switch (B).
3. Check for continuity between the terminals in each
switch position according to the table.
4. If the continuity is not as specified, replace the
switch.
1. Remove the front passenger’s door panel (see page
20-7).
2. Disconnect the 3P connector (A) from the key
cylinder switch (B).
3. Check for continuity between the terminals in each
switch position according to the table.
4. If the continuity is not as specified, replace the
switch.
(cont’d)
With Security:
Without Security:
Wire side of
female terminals
Wire side of
female terminals
Wire side of
female terminals
03/07/29 10:25:58 61S0X050_220_0285
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст