Honda Odyssey 2004. Manual — part 191
01
03
S0X4AA0E10411412282KCAT00
14-158
Automatic Transmission
Shift Lever Installation
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
SRS components are located in this area. Review the
SRS component locations (see page 23-18), and the
precautions and procedures (see page 23-21) in the SRS
before performing repairs or service.
1. Install the shift lever assembly on the steering
column.
2. Turn the ignition switch ON (II), and verify that
the N position indicator comes on.
3. Install the shift cable end to the shift lever. If
necessary, adjust the shift cable (see step 5 on
page 14-162).
03/07/29 09:33:55 61S0X050_140_0161
01
S0X4AA0E10411412282MFAT00
14-159
Shift Lever Disassembly/Reassembly
SHIFT LOCK
SOLENOID
SHIFT LEVER ASSEMBLY
8 x 1.25 mm
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
WASHER
CONTROL BRACKET
CONTROL BRACKET
COLLAR
SELECT LINK
SELF-LOCKING NUT
6 x 1.0 mm
9.8 N·m (1.0 kgf·m,
7.2 lbf·ft)
SHIFT CABLE
SHIFT LEVER BUSHING
PIVOT WASHER
4 mm SCREW
3 N·m (0.3 kgf·m, 2 lbf·ft)
DETENT SPRING
SHIFT LOCK EXTENSION
SHIFT LOCK CUSHION
SHIFT LOCK SOLENOID PLUNGER
PLUNGER SPRING
4 mm SCREW
3 N·m (0.3 kgf·m, 2 lbf·ft)
WASHER
SHIFT LEVER KNOB
9 N·m (0.9 kgf·m, 7 lbf·ft)
Apply silicone grease to these parts:
• Sliding surfaces on the detent plate.
• Sliding area on shift lever and control bracket.
• Movable parts of the shift lock mechanism.
• Select link and shift lever contacting area.
• Select link and control bracket contacting area.
• One side of washer opposite of the self-locking nut.
• Pivot washer.
• Shift lever bushing.
03/07/29 09:33:56 61S0X050_140_0162
01
02
03
S0X4AA0E10411412281KBAT00
14-160
Automatic Transmission
Shift Cable Replacement
D
B
A
E
C
F
B
A
6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
A
B
C
D
E
SRS components are located in this area. Review the
SRS component locations (see page 23-18), and the
precautions and procedures (see page 23-21) in the SRS
before performing repairs or service.
1. Raise the front of the vehicle, and make sure it is
securely supported.
2. Set the parking brake, and block the rear wheels
securely.
3. Remove the steering column covers (see page 17-
25).
4. Shift the transmission into the N position.
5. Remove the nut (A) securing the shift cable end (B),
then separate the shift cable (C) from the shift lever
assembly (D).
6. Rotate the socket holder (E) on the shift cable
counterclockwise a quarter turn, then slide the
holder to remove the shift cable from the shift cable
bracket (F).
7. Remove the shift cable guide bracket (A) and
grommet (B).
8. Remove the bolts securing the shift cable holder (A),
then remove the shift cable cover (B).
NOTE: To prevent damage to the control lever joint,
remove the bolts securing the shift cable holder
before removing the bolts securing the shift cable
cover.
9. Remove the lock bolt (C) securing the control lever
(D), then remove the shift cable (E) with the control
lever.
03/07/29 09:33:56 61S0X050_140_0163
04
14-161
A
B
C
F
E
G
D
6 x 1.0 mm
14 N·m (1.4 kgf·m,
10 lbf·ft)
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
6 x 1.0 mm
9.8 N·m (1.0 kgf·m,
7.2 lbf·ft)
10. Insert the new shift cable through the grommet
hole, then install the shift cable guide bracket.
11. Verify that the transmission is in the N position on
the control shaft.
12. Install the control lever (A) with the shift cable (B)
on the control shaft (C). Do not bend the shift cable
excessively.
13. Install the lock bolt (D) with a new lock washer (E),
then bend the lock washer tab against the bolt head.
14. Install the shift cable cover (F), then install the shift
cable holder (G) on the shift cable cover.
NOTE: To prevent damage to the control lever joint,
be sure to install the shift cable holder after
installing the shift cable cover to the torque
converter housing.
15. Turn the ignition switch ON (II), and verify that the
N position indicator comes on.
16. Install the shift cable end to the shift cable. If
necessary, adjust the shift cable (see step 5 on
page 14-162).
03/07/29 09:33:57 61S0X050_140_0164
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст