Honda Odyssey 2004. Manual — part 378
01
S0X4A00J18533232101KBAT00
01
01
S0X4A00J18533231801KBAT00
20-154
20-154
Openers
Hood Release Handle Replacement
Hood Latch Replacement
Fastener Locations
: Bolt, 2
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
B
A
A
Fastener Locations
: Bolt, 3
6 x 1.0 mm
9.8 N·m (1.0 kgf·m,
7.2 lbf·ft)
Forward
A
A
C
B
C
Forward
1. Remove the left kick panel (see page 20-58).
2. Remove the bolts, then remove the hood release
handle.
3. Disconnect the hood opener cable (A) from the
hood release handle (B). Take care not to kink the
cable.
4. Install the handle in the reverse order of removal,
and note there items:
• Make sure the hood opener cable is connected
properly.
• Make sure the hood opens properly.
NOTE:
• Put on gloves to protect your hands.
• Take care not to scratch the body.
1. Remove the bolts, then remove the hood latch (A)
from the body.
2. For some ’01-04 models, detach the hood latch
switch connector (A) from the body. Disconnect the
hood opener cable (B) from the hood latch (C), and
if equipped, disconnect the hood latch switch
connector. Take care not to bend the cable.
03/07/29 10:04:09 61S0X050_200_0156
03
01
02
S0X4A00J18526327911KBAT00
20-155
20-155
Fuel Fill Door Opener Replacement
A
Fastener Locations
: Bolt, 3
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
B
A
3. Install the latch in the reverse order of removal, and
note these items:
• Apply multipurpose grease to each location
indicated by the arrows.
• Make sure the hood opener cable is connected
properly and the hood latch switch connector is
properly connected.
• Make sure the cable actuates the latch before you
close the hood.
• Adjust the hood latch alignment (see step 3 on
page 20-133).
• Make sure the hood locks securely.
• Security system-equipped models: Verify that the
system arms and that the alarm sounds when the
hood is opened.
1. Remove the opener knob (A).
2. Remove the front door sill trim (see page 20-58).
3. Turn over the carpet (A) and remove the bolts, then
remove the fuel fill door opener (B) from the floor.
(cont’d)
03/07/29 10:04:10 61S0X050_200_0157
03
01
S0X4A00J18526327901KBAT00
20-156
20-156
Openers
Fuel Fill Door Opener Replacement
(cont’d)
Fuel Fill Door Latch Replacement
A
B
A
4. Disconnect the fuel fill door opener cable (A), then
remove the fuel fill door opener (B).
5. Install the opener in the reverse order of removal,
and note these items:
• Make sure the opener cable is connected
properly.
• Make sure the fuel fill door opens properly.
• Check the operation of the sliding door; verify
that the left sliding door locks when the fuel filler
door release is pulled.
1. Remove these items:
• Rear side trim panel (see page 20-60)
• Third row seat belt retractor, with power sliding
door (see page 23-11)
• Quarter plastic cover, as necessary (see page 20-
2. Turn the fuel fill door latch (A) 90°, and remove it.
03/07/29 10:04:11 61S0X050_200_0158
6)
02
*01
01
S0X4A00J18573958101KBAT00
20-157
20-157
Tailgate Handle Replacement
Fastener Locations
: Bolt, 2
6 x 1.0 mm
19 N·m
(1.9 kgf·m,
14 lbf·ft)
Fastener Locations
: Nut, 2
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
A
B
3. Install the latch in the reverse order of removal, and
note these items:
• Apply multipurpose grease to each location
indicated by the arrows.
• Make sure the fuel fill door opens properly and
locks securely.
• Check the operation of the sliding door; verify
that the left sliding door locks when the fuel filler
door release is pulled.
4. Check that the fuel fill door fits flush against the
body. If necessary, adjust it.
5. Apply touch-up paint to the hinge mounting bolts
and around the hinges.
NOTE: Put on gloves to protect your hands.
1. Remove the tailgate trim panel (see page 20-61).
2. Disconnect the handle cable (A) from the tailgate
handle (B).
3. Remove the nuts, then remove the tailgate handle.
4. Install the tailgate handle in the reverse order of
removal, and note these items:
• Make sure the handle cable is connected securely.
• Make sure the tailgate opens properly.
03/07/29 10:04:11 61S0X050_200_0159
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст