Mitsubishi 380. Manual — part 134
FRONT SEAT TRIM COVER
INTERIOR
52A-44
FITMENT
.
1. Locate the new trim onto the pad by aligning the Velcro strip
with the grooves. Use an intersection in order to align both
directions. Whenever possible work from the centre of the
trim toward the outside.
2. Push the Velcro strips into place along all the grooves.
19DB027A
BLUE VELCRO
STRIP
Align trim velcro
in the pad grooves
Intersection
SEAT TRIM
19DB028A
SEAT TRIM
SEAT CUSHION PAD
19DB029A
FRONT SEAT TRIM COVER
INTERIOR
52A-45
3. Pull the cover over the outside of the pad and reattach the
retaining clips where required.
NOTE: It may be necessary to make some adjustment and
work the cover into position to remove creases. Reassemble
seat and fit to vehicle.
19DB030A
Seat trim
retaining clip
Underneath seat
REAR SEAT CUSHION TRIM COVER
INTERIOR
52A-46
REAR SEAT CUSHION TRIM COVER
REMOVAL AND FITMENT
REAR SEAT CUSHION TRIM REMOVAL
.
1. Remove rear seat cushion from vehicle.
2. Release the trim cover draw string.
3. Release all outer cover attachment points.
4. Peel cover away from the foam pad.
NOTE: Place a finger on the Blue Velcro strip when peeling
the cover to prevent the strip being pulled out of the foam
pad.
Draw String
19DB032A
Outer Attachments
19DB033A
Blue Velcro Strip
19DB034A
Seat Trim Cover
REAR SEAT CUSHION TRIM COVER
INTERIOR
52A-47
REAR SEAT CUSHION TRIM FITMENT
.
1. Locate the new trim onto the pad by aligning the Velcro strip
with the grooves. Use an intersection in order toalign both
directions. Whenever possible work from the centre of the
trim toward the outside.
2. Pull the cover around the sides of the pad.
3. Pull trim through the seat belt slots as shown and attach to
wires
19DB035A
Align trim at internal
corner of pad shown here
19DB036A
Cushion Pad
Seat Trim
Cover
19DB037A
Cushion Pad
Trim Cover
Seat Belt slots
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст