Mitsubishi 380. Manual — part 135
REAR SEAT CUSHION TRIM COVER
INTERIOR
52A-48
4. Pull draw string and attach to the centre wire as shown.
5. Reattach all outer points.
6. Work the trim into all the grooves and adjust if necessary to
remove creases as shown.
19DB038A
TRIM COVER AND DRAW
STRING ATTACHED TO
THESE WIRES
19DB039A
CUSHION PAD
SEAT TRIM
19DB040A
REAR SEAT BACK TRIM COVER
INTERIOR
52A-49
REAR SEAT BACK TRIM COVER
REMOVAL AND FITMENT
REAR SEAT BACK TRIM REMOVAL
.
1. Remove rear seat back from the vehicle, and remove arm
rest and arm rest pivot bushes from rear seat back.
2. Release the draw string.
3. Release all outer attachment points. Release all the centre
clips.
19DB041A
19DB042A
Release all clips around
arm rest hole
Release trim from
all outer attachments
REAR SEAT BACK TRIM COVER
INTERIOR
52A-50
4. Peel cover away from the foam pad.
NOTE: Place a finger on the Blue Velcro strip when peeling
the cover to prevent the strip being pulled out of the foam
pad.
Blue Velcro Strip
19DB034A
Seat Trim Cover
REAR SEAT BACK TRIM COVER
INTERIOR
52A-51
REAR SEAT BACK TRIM FITMENT
.
1. Fit the trim over the lower wire brackets.
2. Locate the new trim onto the pad by aligning the Velcro strip
with the grooves. Use an intersection in order to align both
directions. Whenever possible work from the centre of the
trim toward the outside.
3. When all the grooves are aligned pull the cover over the
pad.
19DB043A
LOWER WIRE BRACKET
Intersection
Cushion
Seat
Trim
velcro
Blue strips
in grooves
19DB044A
Cushion
Pad
Seat Trim
Cover
19DB045A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст