Mitsubishi Grandis. Manual — part 828
DOOR MIRROR
EXTERIOR
51-47
AC302386
AC302754
AC304052
AC304053
AC304054
C
C
C
C
C
C
A
A
B
B
A
A
2
2
AB
2
2
Section A – A
Section C – C
Section B – B
Door mirror outer cover claw positions
Note
: Claw positions
Claw
Claw
Claw
<<A>>
1.
Mirror
Door mirror outer cover removal
steps
<<A>>
1.
Mirror
<<B>>
>>A<<
2.
Door mirror outer cover
3.
Side turn-signal lamp
Door mirror assembly removal
steps
•
Front door trim (Refer to group 52A,
Door trim
4.
Door mirror assembly
5.
Clip
Remote controlled mirror switch
removal steps
•
Instrument panel under cover
(Refer to group 52A, Instrument
panel assembly
.)
6.
Remote controlled mirror switch
Door mirror assembly removal
steps (Continued)
DOOR MIRROR
EXTERIOR
51-48
REMOVAL SERVICE POINT
<<A>> MIRROR REMOVAL
CAUTION
The tab of the mirror is prone to breakage when
working in cold temperatures. Always use a hair
drier or the like to warm up the mirror tab and its
periphery to 20
°C or higher prior to works. When
the mirror is heated too quickly from its cold
state, it may be broken.
1. Slant the mirror upward with your hands. Then
insert (
−) screwdriver wrapped with protective
tape between the pivot plate and mirror through
the cut-out from behind the mirror. Now pry off the
mirror tab and release the lower side of the mirror
as shown in the illustration.
2. Release the upper side of the mirror from the tab
as shown while pulling out the mirror.
3. Disconnect the connector of the heated mirror.
<<B>> DOOR MIRROR OUTER COVER
REMOVAL
Remove the door mirror outer cover by disengaging
the tabs in the numerical order of the illustration from
the mirror body side.
AC302711
AC302282
A
A
AB
Section A – A
Claw positions
Claws
Claw
Claw
Pivot plate
Recesses
Mirror
Mirror
Minus screwdriver
Minus screwdriver
Minus screwdriver
Protective tape
AC302415
AC303105
AC302282
A
A
AB
Claw positions
Claw
Pivot plate
Mirror
Mirror
Section A – A
AC302933AB
1
2
3
4
Note
: Claw positions
DOOR MIRROR
EXTERIOR
51-49
INSTALLATION SERVICE POINT
>>A<< DOOR MIRROR OUTER COVER
INSTALLATION
CAUTION
Tap the six tab positions securely to confirm that
they are engaged securely.
There should be a space between the door mirror
outer cover and the rain gutter as shown.
AC303547
AC303080
AC303080
AC303217
A
A
B
B
AB
Rain gutter
Rain gutter
Door mirror outer
cover
Door mirror outer
cover
Door mirror outer
cover
Section A – A
Section B – B
DOOR MIRROR
EXTERIOR
51-50
DISASSEMBLY AND REASSEMBLY
M1511023900050
AC308916
AC303373
AC308903
9
A
A
N
10
4
8
5
6
2
3
1
7
AB
4
8
Section A – A
Disassembly steps
<<A>>
>>B<<
1.
Connector
2.
Body base assembly
3.
Base
4.
Body cover
>>A<<
5.
Actuator
6.
Support assembly
7.
Harness assembly
8.
Body
9.
Support
10. Retractor motor
Disassembly steps (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст