Mitsubishi Grandis. Manual — part 818
MOULDINGS
EXTERIOR
51-7
MOULDINGS
SPECIAL TOOL
M1511000601288
Tool
Number
Name
Application
MB990449
Window molding remover Removal of drip moulding
MB990449
MOULDINGS
EXTERIOR
51-8
MOULDINGS
REMOVAL AND INSTALLATION
M1511004700206
AC313459
AB
1
N
C
C
A
A
B
B
1
1
1
Clip
Fender panel
Windshield
Section A – A
Section B – B
Section C – C
Clip
Clip
Roof panel
Windshield
Side outer panel
Side outer panel
Clip
Roof drip molding removal steps
<<A>> >>A<<
1. Roof drip moulding
GARNISHES
EXTERIOR
51-9
REMOVAL SERVICE POINT
<<A>> ROOF DRIP MOULDING REMOVAL
CAUTION
If the molding has become warped, it should not
be reused.
Use special tool window molding remover
(MB990449) to pry out the moulding.
INSTALLATION SERVICE POINT
>>A<< ROOF DRIP MOULDING
INSTALLATION
Install the clips to the roof drip molding before
installing the molding to the vehicle body.
GARNISHES
ADHESIVE
M1511000500523
GARNISHES
REMOVAL AND INSTALLATION
M1511004100099
AC003626AB
MB990449
Application
Specified adhesive
Side sill garnish
Double-sided tape [5.0 mm width 0.8 mm thickness,
5.0 width 1.2mm thickness]
AC302625
A
A
AB
Section A – A
Clip
Tailgate garnish
Tailgate garnish
GARNISHES
EXTERIOR
51-10
REMOVAL SERVICE POINT
<<A>> SIDE SILL GARNISH REMOVAL
Gently lift and remove the side sill garnish. If there is
any double-sided tape remaining on the side sill
garnish, remove according to the following
instructions.
<Remove double-sided tape remaining on the body
surface>
1. Attach protection tape all the way along the edges
of the double-sided tape which is still adhering to
the body.
AC313480
Clip
Clip
Side outer panel
Section A – A
Double-sided tape affixed location
Section B – B
Double-sided tape: Generic products
a: 5.0 mm width, 1.2 mm thickness, b: 10.0 mm width, 2.5 mm thickness
1
a
b
1
1
1
A
B
B
A
AB
Side outer panel
Removal steps
<<A>> >>A<<
1. Side sill garnish
AC200049
AB
Protection tape
Double-sided tape
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст