Mitsubishi Montero (2002-2004). Manual — part 281
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-171
STEP 16. Check the harness wiring between power
window main switch connector H-05 (terminal 1) and front
power window sub-switch (RH) connector H-16 (terminal
10).
AC203774
CONNECTOR: H-05
AF
DRIVER'S DOOR
H-05
H-05
(HARNESS SIDE)
AC000238
CONNECTOR: H-16
H-16
AF
H-16
(HARNESS SIDE)
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-172
NOTE: Also check intermediate connectors D-25 and D-15. If
intermediate connectors D-25 or D-15 is damaged, repair or
replace the damaged component(s) as described in GROUP
00E, Harness Connector Inspection
Q: Is the harness wiring between power window main
switch connector H-05 (terminal 1) and front power
window sub-switch (RH) connector H-16 (terminal 10) in
good condition?
YES : Replace the power window main switch. Verify that
the front power window sub-switch (RH) should now
work normally.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the front power window sub-switch (RH) should now
work normally.
AC203859 AC
CONNECTOR: D-25
D-25
D-25
AC203860 AB
D-15
D-15
CONNECTOR: D-15
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-173
STEP 17. Check front power window sub-switch (RH)
connector H-16 and front power window motor (RH)
connector H-17 for loose, corroded or damaged terminals,
or terminals pushed back in the connector.
Q: Are front power window sub-switch (RH) connector H-
16 and front power window motor (RH) connector H-17
in good condition?
YES : Go to Step 18.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. Verify that the front power window sub-
switch (RH) should now work normally.
STEP 18. Check the harness wiring between front power
window sub-switch (RH) connector H-16 (terminal 8) and
front power window motor (RH) connector H-17 (terminal
6).
Q: Is the harness wiring between front power window main
switch (RH) connector H-16 (terminal 8) and front power
window motor (RH) connector H-17 (terminal 6) in good
condition?
YES : Go to Step 19.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the front power window sub-switch (RH) should now
work normally.
STEP 19. Check the harness wiring between front power
window sub-switch (RH) connector H-16 (terminal 6) and
front power window motor (RH) connector H-17 (terminal
2).
Q: Is the harness wiring between front power window main
switch (RH) connector H-16 (terminal 6) and front power
window motor (RH) connector H-17 (terminal 2) in good
condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the front power window sub-switch (RH) should now
work normally.
AC000238
CONNECTORS: H-16, H-17
H-16
AG
H-16
H-17
H-17
AC000238
CONNECTORS: H-16, H-17
H-16
AH
H-17
H-16
(HARNESS SIDE)
(HARNESS SIDE)
H-17
AC000238
CONNECTORS: H-16, H-17
H-16
AH
H-17
H-16
(HARNESS SIDE)
(HARNESS SIDE)
H-17
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-174
STEP 20. Check the rear power window sub-switch (LH) for
continuity.
(1) Remove the rear power window sub-switch (LH). Refer to
GROUP 42, Door-Door Trim and Waterproof Film
(2) Check continuity when the rear power window sub-switch
(LH) is operated to "UP" or "DOWN" position.
Q: Is the rear power window sub-switch (LH) normal?
YES : Go to Step 21.
NO : Replace the rear power window sub-switch (LH).
Verify that the rear power window sub-switch (LH)
should now work normally.
STEP 21. Check the rear power window motor (LH).
(1) Remove the rear power regulator assembly (LH). Refer to
GROUP 42, Door-Door Glass and Regulator
.
(2) Connect a battery to the motor terminal, and check that the
motor runs freely.
Q: Is the rear power window motor (LH) normal?
YES : Go to Step 22.
NO : Replace the rear power regulator assembly (LH).
Verify that the rear power window sub-switch (LH)
should now work normally.
SWITCH
POSITION
TESTER
CONNECTION
SPECIFIED
CONDITION
UP
1
− 2, 4 − 6
Less than 2 ohms
OFF
1
− 2, 5 − 6
DOWN
1
− 4, 5 − 6
AC204336
BATTERY CONNECTION
SLIDER POSITION
• Connect terminal 2 to the
negative battery terminal
• Connect terminal 6 to the
positive battery terminal
The slider moves up
• Connect terminal 6 to the
negative battery terminal
• Connect terminal 2 to the
positive battery terminal
The slider moves down
5
6
1
2
3
4
AC000323
SLIDER
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст